Main Menu
Interface Options
(continued)
Print Adjust
Adjusts the horizontal
alignment from line to line.
When you select this
function, a series of alignment
patterns prints.
Trace Mode
Prints the hexadecimal values
for all data sent to the printer.
Setting the Printer Online or Offline
The printer must be online to accept data.
To set the printer:
•
Online, press Start/Stop; the Ready light comes on. If paper is not loaded,
the Check light blinks.
•
Offline, press Start/Stop; the Ready light goes off.
Primary Options
Parity
Does not appear if "Parallel" is
selected for "Interface."
Stop Bits*
Does not appear if "Parallel" is
selected for "Interface."
*Appears only if serial is selected as
the interface option.
Protocol
Does not appear if "Parallel" is
selected for "Interface."
Honor DSR
Does not appear if "Parallel" is
selected for "Interface."
Polarity
—
—If you enter trace mode in error, you
must turn off the printer to clear the
condition.
Chapter 3: Using the Operator Panel
Secondary Options
No, Ignore, Odd, Even
1, 2**
**Does not appear if
automatic interface
switching is selected
XON/XOFF,
Multi XON/XOFF,
DTR Pacing
On, Off
(RS-232 only)
+, - (RS-422 only)
—
—
41