Disabling/Enabling The Operator Panel - Lexmark Forms Printer 4227 Plus User Manual

Disabling/Enabling the Operator
Panel
All buttons except the Start/Stop, FormFeed, and Load/Unload buttons on the
operator panel can be disabled. To disable the operator panel:
1
Turn the printer Off.
2
Press and hold Micro
Note: When any button except Start/Stop, FormFeed, or Load/Unload is
To enable the operator panel, repeat the above procedure.
48
Chapter 3: Using the Operator Panel
and Micro
pressed while the printer is disabled, the Operator Panel Disabled
message appears on the display for approximately 2 seconds.
and then turn the printer On.