Setting And Using A Macro - Lexmark Forms Printer 4227 Plus User Manual

If you want to change the default font or pitch, you must go through the function
menus. The default font and pitch are indicated with asterisks (*). For a brief
explanation of the operator panel buttons, see "Menu Options" on page 34.
Note: Not all pitches are available for all fonts.

Setting and Using a Macro

You can use up to four macros to store your settings permanently. To set a macro,
follow these steps:
1
Press Menu.
2
Press Item
3
Press Next
4
Press Store to save the setting.
5
Press Prev.
6
Set and store your settings (see "Macro x Options" on page 35 for a list of
items you can set in your macro).
7
Press Quit.
To use a macro:
1
Press Menu.
2
Press Item
3
Press Next
4
Press Item .
5
Press Store to save the setting.
6
Press Quit.
until Default Macro appears.
and then Item until Macro x (x = 1 to 4) appears.
and then Item until Macro x Options appears.
until Load Macro appears.
until Macro x (x = 1 to 4) appears.
Chapter 3: Using the Operator Panel
47