Using The Function Menus - Lexmark Forms Printer 4227 Plus User Manual

Using the Function Menus

This section describes the function menus and how to set them. To set functions:
1
Press Start/Stop.
2
Press Menu to enter the function menu.
3
Press Item
display.
Note: The selectable function menu is different depending on the selected
data stream mode (IBM PPDS or Epson emulation) and the Interface
mode (Parallel, RS-232 or RS-422).
Note: If an
pressed to enter the value level of that particular menu item.
4

Press Next
5
Press Item
6
Press Store to save the selected value.
Note: Press
Note: The currently selected default value is displayed with an asterisk ( .
If you have to change the optional value in another function menu,
repeat steps 3 through 5. Otherwise, go to the next step.
7
To print the function setting, press Item
message appears on the display.
8
Press Start/Stop to print the current setting values.
9
Press Quit to exit the function menus.
Note: If you have changed any settings, the printer performs a Power-On
Self Test. If you did not change any settings, the printer enters the not-
ready state.
or Item until the function menu you want appears on the

symbol appears on the display, the Next
to enter that menu item.
or Item until the value you want appears on the display.

to exit each level of the menu.
Prev.

button must be
or Item until the Print Settings
Chapter 3: Using the Operator Panel
31