Safety Information - Lexmark Forms Printer 4227 Plus User Manual

• Reorient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult your point of purchase or service
representative for additional suggestions.
The manufacturer is not responsible for any radio
or television interference caused by using other
than recommended cables or by unauthorized
changes or modifications to this equipment.
Unauthorized changes or modifications could
void the user's authority to operate this
equipment.
Note: To assure compliance with FCC regulations
on electromagnetic interference for a Class
B computing device, use a properly
shielded and grounded cable such as
Lexmark part number 1329605. Use of a
substitute cable not properly shielded and
grounded may result in a violation of FCC
regulations.
European Community (EC)
Directives Conformity
This product is in conformity with the protection
requirements of EC Council directives 89/336/
EEC and 73/23/EEC on the approximation and
harmonization of the laws of the Member States
relating to electromagnetic compatibility and
safety of electrical equipment designed for use
within certain voltage limits.
A declaration of conformity with the requirements
of the Directive has been signed by the Director of
Manufacturing and Technical Support, Lexmark
International, S.A., Boigny, France.
This product satisfies the Class B limits of EN
55022 and safety requirements of EN 60950.
Industry Canada Compliance
Statement
118
Appendix A:
This Class B digital apparatus meets all
requirements of the Canadian Interference-
Causing Equipment Regulations.
Avis de conformité aux normes
d'Industrie Canada
Cet appareil numérique de la classe B respecte
toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
The United Kingdom
Telecommunications Act 1984
This apparatus is approved under the approval
number NS/G/1234/J/100003 for the indirect
connections to the public telecommunications
systems in the United Kingdom.
Japanese VCCI Notice

Safety Information

•
If your product is NOT marked with this
symbol , it MUST be connected to an elec-
trical outlet that is properly grounded.
•
The power cord must be connected to an elec-
trical outlet that is near the product and eas-
ily accessible.
•
Refer service or repairs, other than those
described in the operating instructions, to a
professional service person.
•
This product is designed, tested and
approved to meet strict global safety stan-
dards with the use of specific Lexmark com-