Lexmark Forms Printer 4227 Plus User Manual page 134

printer functions setting.
that determine how the printer
operates.
proportional spacing.
characters according to their natural
width.
R
Random access memory.
RAM.
A font stored in the
resident font.
printer.
S
Letters printed without
sans serif.
short lines stemming from the upper
and lower ends.
A type of connection
serial interface.
that links a printer to a computer, by
which the 8 bits of a character are sent
one bit at a time.
A short line stemming from, and
serif.
at an angle to, the upper and lower
ends of the strokes of a letter.
A single form or sheet of
single sheets.
paper that is not connected to other
sheets. The sheet can have more than
one part, such as an original and one
or more copies.
standard-carriage printer.
has the ability to print on forms up to
279.4 mm (11 in.) wide.
Mode in which the printer is
start.
communicating with the computer.
128
The settings
stop.
communicating with the computer.
subscript.
Spacing of printed in the bottom half of the
normal printing line.
superscript.
printed in the top half of the normal
printing line.
system board.
that supports a variety of basic system
devices.
T
Top-Of-Form (TOF).
the paper where the first line prints.
Also referred to as the load position.
tractor feed.
automatically feeds continuous forms.
U
underscore.
character.
unidirectional printing.
from left to right.
V
variable forms length.
forms length feature lets you set your
Printer that
form length from a range of one line to
a maximum of 22 inches.
Mode in which the printer is not
One or more characters
One or more characters
The main circuit board
The line position of
A device that
A line printed under a
Printing only
The variable