b
Move the right paper guide so that it aligns with the right edge of
the envelope.
c
Push the envelope in until the Check light stops blinking.
The Paper Empty/Add Paper message disappears.
• If Auto Cut Sheet Load is On (factory default), the paper feeds
• If Auto Cut Sheet Load is Off, press FormFeed.
10
Make sure the printer is online (Ready light is on solid). If it is not,
press Start/Stop until the Ready light is on solid. You are now ready to
print.
Note: If the Ready light does not come on solid, make sure that the
Loading Continuous Forms
The printer offers one paper path for continuous forms.
62
Chapter 4: Selecting and Loading Paper
Address added
to show correct
orientation.
automatically to the TOF position. For help, see "Setting Auto
Cut Sheet Load" on page 56.
media has been inserted far enough into the printer.