Samson TROVIS 5179 Mounting And Operating Instructions page 127

InF9: Communication
(only with Co9 -> Fb01 = ON, Co9 -> Fb06 = ON or Co9 -> Fb10 = ON)
In the main display loop, the connection status appears in the InF9 level and only exists when
the modem, SMS or fax function is active, otherwise just "END" appears on the display.
In this display, the applicable status from the following list of states appears when a modem
connection is established.
4
Device start (not yet initialized), dialing interval
PAUSE:
4
INIT: Modem has been initialized
4
FREE: No connection established, modem is ready
4
Modem has been dialed, connection has not yet been established
RING:
4
CALL: Modem is dialing the control station
4
CONN: Connection to control station is established
4
Disconnection taking place
ENDE:
With "Fax function" setting, GENG3, 00, 40, 60, 80 appear on the display in sequence as
the connection is being established.
Appendix
127
EB 5179 EN