Operation Mode - Mitsubishi Electric FR-E5NP Instruction Manual

INVERTER SETTING

3.2 Operation Mode

The inverter mounted with the option unit (FR-E5NP) has the following operation modes:
(1) PU operation [PU]........................... Controls the inverter from the keyboard of the operation panel or
(2) External operation [EXT] ................ Controls the inverter by switching on/off external signals
(3) Network operation [NET] ................ Controls the inverter with instructions from the Profibus master
parameter unit (FR-PU04) (referred to as the "PU") installed to the
inverter.
connected to the control circuit terminals of the inverter.
(The inverter is factory-set to this mode.)
module via the option unit (FR-E5NP).
(The operation signal and running frequency can be entered from
the control circuit terminals depending on the Pr. 338 "operation
control command source" and Pr. 339 "speed command source"
setting.)
10