Mitsubishi Electric FR-E5NP Instruction Manual page 69

PARAMETER DEFINITIONS—PPO Non Support Specification
(2) Inverter status/operation command
The inverter status can be monitored and operation command can be given from the master.
IND PNU
Inverter status
Refer to page 50.
Operation command
0100 A
H H
MRS terminal
*1 These are factory-set signals. Input signals can be changed by input terminal function
Name Bit
- 0
STF terminal 1
STR terminal 2
RH terminal 3
RM terminal 4
RL terminal 5
- 6 to 9
10
- 11 to 15 Not used (0 is set)
selection (Pr. 180 to Pr. 183).
Item
Reserved (0 is set)
0: STF-OFF 1: STF-ON (forward rotation command)
0: STR-OFF 1: STR-ON (reverse rotation command)
0: RH-OFF 1: RH-ON (high-speed operation command)*1
0: RM-OFF 1: RM-ON (middle-speed operation command)*1
0: RL-OFF 1: RL-ON (low-speed operation command)*1
Not used (0 is set)
0: OFF 1: ON (Output shutoff)*1
62
Description