Mitsubishi MELSEC-Q Series User Manual page 468

Web server module
Hide thumbs Also See for MELSEC-Q Series:
Table of Contents

Advertisement

9 TROUBLE SHOOTING
Error
Error name
code
9E20h
Processing code error
9E81h
Device type error
9E82h
Device number error
Number of device
9E83h
points error
B000h
Errors detected in the CC-Link system
to
Refer to the CC-Link System Master/Local Module User's Manual.
BFFFh
C000h
Errors detected in the Ethernet interface module
to
Refer to the Ethernet Interface Module User's Manual.
CFFFh
E000h
Errors detected in the CC-Link IE controller network
to
Refer to the CC-Link IE Controller Network Reference Manual.
EFFFh
F000h
Errors detected in the MELSECNET/H, MELSECNET/10 network system
to
Refer to the MELSECNET/H, MELSECNET/10 Network System Reference Manual.
FEFFh
FFD0h
System error
Monitor condition
FFD1h
dissatisfied error
FFD2h
System error
FFD3h
FFD4h
FFD5h
ROM operation error
FFD6h
FFD7h
FFD9h
FFDAh
System error
FFDBh
FFDCh
FFDDh
FFDEh
Incorrect access target
FFDFh
error
9 - 43
Error definition
The issued processing code
cannot be processed by the target.
The device type specified for the
access target station is Invalid.
The device number specified for
the access target station is outside
the range.
The number of device points
specified for the access target
station is outside the range.
Data cannot be read since the
monitor condition is not satisfied.
T/C set values were written to the
programmable controller CPU
during ROM operation.
The setting of the access target
CPU is incorrect.
(From the previous page)
Corrective action
• Check the CPU in the access
path.
• Check the device type input in
the device monitor or component
setting.
• Check the device number input in
the device monitor or component
setting.
• Check the device number input in
the device monitor or component
setting.
• System error ( 1)
• Delete the monitor condition
using GX Developer.
• System error ( 1)
• Change the T/C set values
during RAM operation.
• System error ( 1)
• Check the access target CPU
setting. (Refer to Section 4.6.7)
(Continued on the next page)
MELSEC-Q
Error type
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
9 - 43

Advertisement

Table of Contents
loading

Table of Contents