Mitsubishi MELSEC-Q Series User Manual page 249

6 FUNCTIONS
6 - 47
2) Checked
• When the file is saved, it is attached to e-mail and sent.
• Refer to Section 6.6.5 for the e-mail transmission by the logging
function.
3) E-mail addresses 1 to 3
Select the e-mail addresses set in the "E-mail address (TO:) setting" of
the E-mail setting. (Refer to Section 6.6.3 for the E-mail setting.)
(l) File transfer: Transfer a saved file to the following FTP server.
Set whether the saved file will be transferred to the FTP server or not.
1) Not checked
The file is not transferred.
2) Checked
• When the file is saved, it is transferred to the FTP server.
• Refer to Section 6.7.6 for the file transfer by the logging function.
3) Transfer target
Select the FTP server name set in the FTP setting. (Refer to Section
6.7.3 for the FTP setting.)
(3) Setting method and precautions for high-speed logging
(a) Setting method for high-speed logging
When performing high-speed logging, make the following settings in the
logging setting. Only one high-speed logging can be registered.
For other than the following, the user can set as desired.
1) Tag name : Select the tag set to "Sampling: Execute at high speed"
2) Save in
3) Timing
(b) Precautions for high-speed logging
1) Be sure to create a user setting system area in the program memory of
the control CPU.
In the case of a redundant system, create two user-setting system
areas of the same volume for the redundant CPUs in both systems.
(Refer to Section 6.3.3 REMARKS .)
When the control CPU is the Universal model QCPU, creation of a
user specified system area is not required.
2) Depending on the scan time of the control CPU and/or the time of
access from the peripheral device/intelligent function module to the
programmable controller CPU, a time lag may occur in the logging
interval.
POINT
After changing the settings, make sure to click on the "Save" button.
The settings are updated when the "Update" button on the Setting update screen is
clicked, the programmable controller is powered off and then on, or the CPU
module is reset.
: Fixed to "Compact Flash
: Fixed to "Same as the tag sampling interval"
MELSEC-Q
TM
card"
6 - 47