Mitsubishi MELSEC-Q Series User Manual page 266

6 FUNCTIONS
6 - 64
(e) Attached file
1) Select the file attached to e-mail.
(None, Tag data, Logging Data)
2) When attaching tag data, select the tag data set in the tag setting.
(Refer to Section 6.3.3 for the tag setting.)
3) When attaching logging data, select the logging data set in the logging
setting.
(Refer to Section 6.4.4 for the logging setting.)
(f) Send to 1 to 16
1) Select the destination of e-mail.
2) Select the e-mail address set in the "E-mail address (TO:) setting" of
the E-mail setting. (Refer to Section 6.6.3 for the E-mail setting.)
3) In the selection field for Send to, the setting No. and e-mail address of
the "E-mail address (TO:) setting" are displayed.
POINT
After changing the settings, make sure to click on the "Save" button.
The settings are updated when the "Update" button on the Setting update screen is
clicked, the programmable controller is powered off and then on, or the CPU
module is reset.
MELSEC-Q
6 - 64