Mitsubishi MELSEC-Q Series User Manual page 453

9 TROUBLE SHOOTING
Error
Error name
code
0624h Backing up ...
0625h Restoring ...
Multiple CPU setting
0626h
error
9 - 28
Error definition
At start-up or setting update, the
following was detected.
• File access was attempted
during "backup" in Data
management.
At other than start-up or setting
update, the following was detected
in the logging function or
dedicated instruction.
• File access was attempted
during "backup" in Data
management.
At other than start-up or setting
update, the following was detected
in the dedicated instruction, or
user parts.
• File access was attempted
during "backup" in Data
management.
At start-up or setting update, the
following was detected.
• File access was attempted
during "restore" in Data
management.
At other than start-up or setting
update, the following was detected
in the logging function or
dedicated instruction.
• File access was attempted
during "restore" in Data
management.
At other than start-up or setting
update, the following was detected
in the dedicated instruction, or
user parts.
• File access was attempted
during "restore" in Data
management.
Invalid setting was made in
"Multiple CPU specification" of the
access target CPU setting.
(From the previous page)
Corrective action
• Execute after confirming
completion of backup in "Status"
of Data management.
(Refer to Section 6.10.4)
• Execute after confirming
completion of restoration in
"Status" of Data management.
(Refer to Section 6.10.4)
• Check the access target CPU
setting. (Refer to Section 4.6.7)
(Continued on the next page)
MELSEC-Q
Error type
Stop
Continue
Display
Stop
Continue
Display
Stop
9 - 28