Mitsubishi MELSEC-Q Series User Manual page 145

4 SET-UP AND PROCEDURE BEFORE OPERATION
4 - 28
(1) Connection method
Set the connection method of the Web server module.
(a) Select the method of connecting the Web server module to the Internet
from Modem or ADSL.
(b) Make the settings of (2) to (6) according to the selected connection method.
The items unnecessary for the selected connection method are disabled.
Input to the column cannot be made.
(2) Connection account
Set the account for connecting to the Internet service provider.
(a) Set the account data for connecting to the Internet service provider.
1) User name (1 to 128 characters)
Enter the user name (user ID) registered for the connection target
Internet service provider.
Refer to Appendix 4 (2) for the characters applicable to the user name.
2) Password (1 to 128 characters)
Enter the password registered for the connection destination Internet
service provider.
Refer to Appendix 4 (2) for the characters applicable to the password.
3) Confirm password
Enter the password again to confirm the password.
(b) A contract with an Internet service provider is required prior to Internet
connection.
Contact the Internet service provider for the available services and the
contract.
POINT
A contract with an Internet service provider is required prior to Internet connection.
(3) Access point
(a) Set the access point (Phone number) for the Internet service provider.
Refer to Appendix 4 (4) for the characters applicable to the Phone number.
(b) Up to three access points of the same Internet service provider can be
registered. ( )
When setting more than one access point, select "Change access point
automatically." in Retry.
(4) Dial method
Set the dialling method.
• Tone
• Pulse
MELSEC-Q
4 - 28