Mitsubishi MELSEC-Q Series User Manual page 351

7 USER SCREEN CREATION FUNCTION
Item
TAGNO
ELMNO
RANGENO ( 1)
LOW1
HIGH1
AUDIO1 ( 2)
Setting
range 1
REPEAT1 ( 3)( 4)
PLAYMODEL1 ( 4)
7 - 22
1 If any setting ranges are overlapped, the audio file with the smaller number is played. (For
parameter PLAYMODE=0 (Stop))
Audio 1
FILE1.WAV
HIGH1
Audio 2
FILE2.WAV
LOW1
Setting range 1
1) When the value enters the Audio 1 setting range during play of Audio 2, the
Audio 2 play is stopped and Audio 1 is played.
2) When the value goes out of the Audio 1 setting range (within the Audio 2
setting range), replay Audio 2 from the beginning.
(2) Parameter
Sets the tag data for playing audio files using the tag setting
No. (Refer to Section 6.3.3.)
Sets the component for playing audio files using the
component setting No. (Refer to Section 6.3.3.)
Sets the quantity in the setting range.
Sets the minimum limit of the setting range 1.
Sets the maximum limit of the setting range 1.
Sets the audio file (.WAV, .AU) of setting range 1.
When the component value is within setting range 1, the
audio file is played.
The audio file shall be prepared by the user.
Sets whether the play of the audio file is to be repeated or
not.
0: Not repeat 1: Repeat
Sets the operation to be performed when the component
value exceeds the setting range during audio file play.
0: Stop 1: Continue
HIGH2
1)
2)
LOW2
Setting range 2
Description
MELSEC-Q
Audio file to be played
FILE2.WAV
Since setting range 1 has
priority, Audio 1 is played.
FILE1.WAV
FILE2.WAV
Setting Range Initial Value
1 to 64 Must be set
1 to 64 Must be set
1 to 5 Must be set
-2147483648
Must be set
to
2147483647 Must be set
String
Must be set
(.WAV, .AU)
0, 1
0, 1
1
(Repeat)
0
(Stop)
7 - 22