Mitsubishi MELSEC-Q Series User Manual page 269

6 FUNCTIONS
6.6.2 Setting procedure for e-mail function
6 - 67
The following is the setting procedure for use of the e-mail function.
(1) Common procedure
The common procedure for this function is shown below.
Start
Create a network environment for Web server module
to access the Web server module from a personal
computer.
For use of DNS server, make the DNS setting on
the System setting.
Make the required setting for sending e-mail on
the E-mail setting.
1)
(2) Procedure for sending e-mail by programmable controller CPU
1)
Collect the tag data or logging data to be attached to
e-mail and sent.
Create a sequence program (WMSEND instruction).
Completed
(3) Procedure for sending e-mail by event monitor function
1)
Collect the tag data or logging data to be attached to
e-mail and sent.
Make the setting on the Event setting so that an
e-mail will be sent upon event occurrence.
Completed
MELSEC-Q
Refer to
Section 4. 6.
Refer to
Section 4. 6. 3.
Refer to
Section 6. 6. 3.
For tag function, refer to
Section 6. 3.
For logging function, refer
to Section 6. 4.
Refer to Section 8. 2.
For tag function, refer to
Section 6. 3.
For logging function, refer to
Section 6. 4.
For event function, refer to
Section 6. 5.
6 - 67