Mitsubishi MELSEC-Q Series User Manual page 207

6 FUNCTIONS
6 - 5
(e) Setting value
1) When setting the data type as a 16 bit integer or 32 bit integer, set a
new value in accordance with the DEC/HEX input form.
2) When setting the data type in bit, set ON/OFF.
POINT
(1) The device test may affect the control of the programmable controller. Ensure
safety before execution.
(2) A user without the device write authority is not allowed to conduct the device
test.
When the device test is attempted, the following screen appears.
(3) When Device write disable request (YA) has been set to "Disable", the device
test is not available.
When the device test is attempted, the following screen appears.
MELSEC-Q
6 - 5