Mitsubishi MELSEC-Q Series User Manual page 347

7 USER SCREEN CREATION FUNCTION
Item
TAGNO
ELMNO
FONTSIZE
DEFCMT
DEFCOLOR
BKCOLOR
RANGENO ( 1)
LOW1
HIGH1
Setting
range 1
CMT1
COLOR1
Setting LOW2, HIGH2,
range 2 CMT2, COLOR2
Setting LOW3, HIGH3,
range 3 CMT3, COLOR3
Setting LOW4, HIGH4,
range 4 CMT4, COLOR4
Setting LOW5, HIGH5,
range 5 CMT5, COLOR5
7 - 18
(2) Parameter
Sets the tag data for comment display using the tag setting No.
(Refer to Section 6.3.3)
Sets the component for comment display using the component
setting No. (Refer to Section 6.3.3)
Specifies the character size.
Sets the default comment.
Displayed when the component value is outside the setting
range.
Refer to Appendix 4 (5) for the applicable characters.
Sets the display color of the default comment.
Sets the background color.
Sets the quantity in the setting range.
Sets the minimum limit of the setting range 1.
Sets the maximum limit of the setting range 1.
Sets the comment in the setting range 1.
Displayed when the component value is in the setting range 1.
Refer to Appendix 4 (5) for the applicable characters.
Sets the display color of the comment in the setting range 1.
Sets the setting range 2. (The setting is the same as the setting range 1)
Sets the setting range 3. (The setting is the same as the setting range 1)
Sets the setting range 4. (The setting is the same as the setting range 1)
Sets the setting range 5. (The setting is the same as the setting range 1)
1 Be sure to set LOWs, HIGHs and CMTs as many as the quantity specified at RANGENO.
Failure to do so will result in an error. (Refer to Section 7.5.)
Description
MELSEC-Q
Setting Range Initial Value
1 to 64 Must be set
1 to 64 Must be set
8 to 72 20
Comment
String not set (Not
displayed)
String Black
String White
1 to 5 Must be set
-2147483648
Must be set
to
2147483647 Must be set
String Must be set
String Red
7 - 18