Mitsubishi MELSEC-Q Series User Manual page 160

4 SET-UP AND PROCEDURE BEFORE OPERATION
4 - 43
(d) Other station specification
Set whether other station is specified or not.
1) No specification
Select this setting when making access to the host CPU.
2) Other station (Single network)
Select this when accessing a CPU on another station via only one kind
of network, such as CC-Link IE controller network, MELSECNET/H,
MELSECNET/10 or Ethernet, or via a network consisting of multi-tier
systems.
Specify Single network for systems containing the following network:
• CC-Link IE controller network
• MELSECNET/H
• MELSECNET/10
• Ethernet
3) Other station (Different network)
Select this when accessing a CPU on another station via two kinds of
networks.
Two kinds of networks represent two different networks such as
combination of CC-Link IE controller network, MELSECNET/H,
MELSECNET/10 and CC-Link, or Q series C24 and CC-Link IE
controller network, MELSECNET/H, MELSECNET/10.
(e) Network communication route, Different network communication route
Set the network type, network No., start I/O address and station No. to be
accessed.
The setting items change depending on the set network.
POINT
(1) For access to the other station CPU, the routing parameters must also be set in
addition to this setting.
For the routing parameters, refer to the manual of the network module.
(2) After changing the settings, make sure to click on the "Save" button.
The settings are updated when the "Update" button on the Setting update
screen is clicked, the programmable controller is powered off and then on, or
the CPU module is reset.
MELSEC-Q
4 - 43