System Time Correction Manually - Planet Networking & Communication IGS-5225-8T2S2X User Manual

4.2.1.6.1 System Time Correction Manually

Configure NTP on this page. NTP is an acronym for Network Time Protocol, a network protocol for synchronizing the clocks of
computer systems. NTP uses UDP (data grams) as transport layer. You can specify NTP Servers. The NTP Configuration
screen in Figure 4-2-9 appears.
The page includes the following fields:
Object
• User Manually
•
Date
Buttons
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-2-9: System time correction Manually Page Screenshot
Description
Indicates the NTP mode as manual operation. Possible modes are:

Enabled: Enable NTP manual mode operation. When enabling NTP user
manually mode operation, the system time will follow the date setting.

Disabled: Disable NTP user manual mode operation.
If enable the user manually , Switch can set the Year / Mouth / Day/ Hour / Minute
/ Second in this page
User's Manual of IGS-5225-8T2S2X & 8P2S2X series
69