Snmp System Configuration - Planet Networking & Communication IGS-5225-8T2S2X User Manual

default communities are:
。
Write = private
。
Read = public
Use the SNMP Menu to display or configure the Industrial Managed Switch 's SNMP function. This section has the following
items:

System Configuration

Trap Configuration

System Information

SNMPv3 Communities

SNMPv3 Users

SNMPv3 Groups

SNMPv3 Views

SNMPv3 Access

4.2.2.2 SNMP System Configuration

Configure SNMP on this page. The SNMP System Configuration screen in
The page includes the following fields:
Object
•
Mode
•
Version
•
Read Community
Configure SNMP on this page.
Configure SNMP trap on this page.
The system information is provided here.
Configure SNMPv3 communities table on this page.
Configure SNMPv3 users table on this page.
Configure SNMPv3 groups table on this page.
Configure SNMPv3 views table on this page.
Configure SNMPv3 accesses table on this page.
Figure 4-2-2-2: SNMP System Configuration Page Screenshot
Description
Indicates the SNMP mode operation. Possible modes are:

Enabled: Enable SNMP mode operation.

Disabled: Disable SNMP mode operation.
Indicates the SNMP supported version. Possible versions are:

SNMP v1: Set SNMP supported version 1.

SNMP v2c: Set SNMP supported version 2c.

SNMP v3: Set SNMP supported version 3.
Indicates the community read access string to permit access to SNMP agent.
User's Manual of IGS-5225-8T2S2X & 8P2S2X series
Figure 4-2-2-2
86
appears.