Fh-1000/2000/3000/5000 Series - Omron FZ5 Series Hardware Setup Manual

6-1-2

FH-1000/2000/3000/5000 Series

Parallel interface are common NPN/PNP type. An appropriate wiring is required according on the exter-
nal device.
Encoder interface (open corrector type) is also included.
Encoder interface (open corrector type) is ENCTRIG_A*, ENCTRIG_B*, and ENCTRIG_Z*.
Wire the pins to Encoder appropriately.
Interface Specification
• Specifications differ by number of pins
• Encoder interface (open corrector type) is ENCTRIG_A*(8 pins,11 pins), ENCTRIG_B* (12 to 13
pins, or ENCTRIG_Z*' (4 to 5 pin). The frequency response of Encoder interface (open corrector
type) is 4 KHz.
 [Input]
Applicable signals/
• No.14 pin:
Connect the COMIN1 terminal when using these signals.
• No.37 to 46 pins:
Connect the COMIN2 terminal when using these signals.
Item
Input voltage
*1
ON current
*1
ON voltage
*2
OFF current
OFF voltage
ON delay
OFF delay
*1. ON current and ON voltage:
Those mean the current or voltage to turn ON from OFF. The ON voltage value is the potential difference
between COMIN and each input terminal
*2. OFF current and OFF voltage:
Those mean the current or voltage to turn OFF from ON. The OFF voltage value is the potential difference
between COMIN and each input terminal
Vision System FZ5 series Hardware Setup Manual (Z423)
12 to 24 VDC ±10%
5 mA min.
8.8 V min.
0.5 mA max.
*2 1.1 V max.
5 ms max.
0.7 ms max.
Specifications
6 I/O Interface
6
6 - 3