Fz5 Series - Omron FZ5 Series Hardware Setup Manual

5-8-5

FZ5 Series

Precautions for Correct Use
Ambient Temperature
• Install and store the product in a location that meets the following conditions:
• Surrounding temperature of 0 to 50°C (-20 to +65°C in storage)
• Relative humidity of between 35 to 85%RH
• Do not let the ambient temperature exceed 50°C (122°F).
• Provide a forced-air fan cooling or air conditioning if the ambient temperature is near 50°C
(122°F) so that the ambient temperature never exceeds 50°C (122°F).
• For good ventilation, provide a clearance of 50 mm or more above the Sensor Controller
away from other devices in the normal floor mounting. For the back side, 10 mm or more.
These clearances are also required when mounting multiple sensor controllers side by side.
For the back mounting, the back-side clearance of 15 mm is nor required. However, if the
adjacent devices do not generate heat, provide at least 50 mm of clearance from the top of
the Controller.
Vision System FZ5 series Hardware Setup Manual (Z423)
5 Setup and Wiring
5 - 51
5