5 Setup and Wiring
• When mounting the DIN rail, for improvement of heat dissipation, install the product in the follow-
ing orientation only.
Clearance: 50 mm
Clearance: 50 mm
Clearance: 50 mm
Clearance: 30 mm
Clearance: 30 mm
Clearance: 30 mm
• Do not install in this orientation.
Set DIN rail bottom of the Sensor Controller.
DIN Track
Set DIN rail vertical of the Sensor Controller.
5 - 20
Clearance: 15 mm
Clearance: 15 mm
Clearance: 15 mm
Clearance: 30 mm
Clearance: 30 mm
Clearance: 30 mm
Set DIN rail above of the Sensor Controller.
Set DIN rail horizontal of the Sensor Controller.
Vision System FZ5 series Hardware Setup Manual (Z423)
DIN Track