Fh-L Series - Omron FZ5 Series Hardware Setup Manual

5-8-4

FH-L Series

Precautions for Correct Use
Ambient Temperature
• Install and store the product in a location that meets the following conditions:
• Surrounding temperature of 0 to 55
• Relative humidity of between 10 to 90
Orientation of Product
• For good heat dissipation, install the product only in the position shown below so as not to
block the ventilation holes.
• Do not install the product in the following positions.
• To keep proper air flow, keep the top of the FH Sensor Controller 50 mm or more apart from
other devices. Install the FH Sensor Controller with a clearance of 25 mm on the right and left
side, and 25 mm for rear planes. The clearance is required for installing multiple units
side-by-side.
Vision System FZ5 series Hardware Setup Manual (Z423)
°C °C
(-25 to +70 in storage)
%
RH
5 Setup and Wiring
5 - 43
5