3 Configuration
3-6
LCD and Cable
Specification
LCD Monitor
Model
Size
Type
Resolution
Input signal
Power supply voltage
Current consumption
Ambient temperature range
Ambient humidity range
Weight
Accessories
LCD Monitor Cable
Model
Vibration resistiveness
Ambient temperature range
Ambient humidity range
Ambient atmosphere
Material
Minimum bending radius
Weight
Precautions for Correct Use
• Use the DVI-Analog Conversion Cable for Touch Panel Monitor: FH-VMDA when connect the
following Sensor Controllers to the LCD monitor: FZ-M08:
• FH-1000 Sensor Controller
• FH-2000 Sensor Controller
• FH-3000 Sensor Controller
• FH-5000 Sensor Controller
• FH-L Sensor Controller
• FZ-VM cable can use by combining the DVI-I -RGB Conversion Connector: FH-VMRGB.
3 - 96
8.4 inches
Liquid crystal color TFT
1,024 × 768 dots
Analog RGB video input 1 channel
21.6 to 26.4 VDC
Approx. 0.7 A max.
Operating: 0 to 50°C
Storage: -25 to 65°C
(with no icing or condensation)
Operating and storage: 35 to 85%RH (with no condensation)
Approx. 1.2 kg
Instruction Sheet and 4 mounting brackets
10 to 150 Hz single amplitude 0.15 mm
3 directions, 8 strokes, 4 times
Operation: 0 to 50°C
Storage: -20 to 65°C
(with no icing or condensation)
Operation and storage: 35 to 85%RH
(with no condensation)
No corrosive gases
Cable sheath: heat-resistant PVC Connector: PVC
75 mm
Approx. 170 g
Vision System FZ5 series Hardware Setup Manual (Z423)
FZ-M08
FZ-VM