Synergy Print Box - Kyocera KM-1530 User Manual

1
2
3
4
User Guide
In the Job tab, click Job storage (e-MPS) and then select Job Storage.
Select the Access code check box and type in the desired four-digit access code.
When you want to print the saved jobs, type in the access code on the printing
system's operation panel.
You can name the job for future reference when printing from the printing system's
operation panel.
• If you select Application defined in the Job name box, the application
automatically names the document.
• To give it a name you create, in Job name, select Custom and type in the name
of your choice. The name can be up to 31 characters in length.
Click OK. When you select print, the job will be saved to the hard disk without
printing.
Print Jobs Saved Using Job Storage
To print forms and other documents saved using Job Storage, follow the same steps
as for Print Private Print Jobs
The stored jobs will remain saved even after the printing system is switched off. To
delete them manually, follow the same steps as for
page 8-15. When deleting jobs, you must type in the same access code as saved in
the Job storage procedure.

Synergy Print Box

Synergy print box (SPB) combines electronic and copier data into one document and
stores them in your choice of virtual output print boxes. Copier documents and print
jobs from various applications can be combined.
This feature is available on KM-4530, KM-5530, KM-6030, KM-6330, KM-7530 and
KM-8030. This feature is not available on all printers. See your printing system's
Operation Guide for more information on this feature.
on page 8-16.
Delete Quick Copy Jobs
Job
1
2
3
4
on
8-18