Device Options - Kyocera KM-1530 User Manual

1
2
User Guide
the Device Options list. Depending upon the model, available devices include
finishers, paper feeders, side feeders, high-capacity feeders, hard disk and RAM
disk, tandem unit, booklet stitcher, and duplex unit.
For models connected to a network, the Auto Configure button can be used to
select all available devices. See
You can also specify the memory setting, PDL (Page Description Language),
settings for the user, administrator settings for passwords and more.
Note: The printer image shown in the Printer Properties dialog box and the list of
Device options will vary depending on the printing system you have.

Device Options

Click the Device Settings tab.
Under Device options in the Device Settings tab, select the check boxes for
devices installed in your printing system.
Note: Some devices cannot be installed simultaneously. For example, a finisher and
a booklet stitcher cannot be used at the same time. After you have selected a device,
other devices will be marked with a red X, preventing the selection of conflicting
devices.
When you select the check box of an optional device shown in blue, a sub-dialog box
appears with additional setting details. If a device option check box is already
selected, double-click the device option to open the sub-dialog box.
The Hard Disk Settings dialog box appears if you select the Hard disk option,
enabling the configuration of boxes. For further details, see
page 8-8.
Auto Configure on page 2-15 for more information.
Printer Properties
Virtual Mail Box on
2-2
1
2
3