Kyocera KM-1530 User Manual page 105

1
2
4
5
6
7
8
9
User Guide
When initially printing a job, follow the steps below to print a barcode representing
the job ID on each page or on the cover page only.
{28L016T50}
By simply reading the barcode with the barcode reader, you can reprint either a page
or the entire job.
Print a Barcode on a Print Job
From the application's Print dialog box, open the Properties. (Select Print from the
File menu).
Open the Properties dialog box and click the Job tab.
3 Select the Job storage (e-MPS) check box.
Select Temporary or Permanent.
Click Options to open the Barcode Options dialog box.
Select the Barcode check box. Select Print on first page only or Print on all
sheets.
If you want to print the job ID as characters with the barcode, as shown in the
diagram below, select the Print Barcode ID check box.
Note: Some models do not support the barcode feature.
From the Position list, select the barcode position on the page. From the
Orientation list, select the direction of the barcode.
Click OK.
{28L016T50}
Barcode ID
Job
1
2
3
4
5
6
7
8
9
8-6