Monochrome Mode; Compatibility Settings - Kyocera KM-1530 User Manual

Compatibility Settings

User Guide
information embedded in each page. Embedded information does not affect the
appearance of printed documents. Select Color page count to enable this feature.
For accounting purposes:
• A page with any color is counted as a color page.
• A page with black only is counted as a monochrome page.
• A blank page is counted as a monochrome page.

Monochrome Mode

Monochrome mode disables all color settings in the driver's Imaging tab and prints
with black toner only. This feature is available on color printers only.
To use monochrome mode:
1
In the Device Settings tab, click Administrator to open the Administrator Settings
dialog box.
2 Select Monochrome mode.
This feature supports compatibility for media source values unique to the printer
driver, such as those for cassettes or feeders, so your newly installed KX driver
maintains identical media source support with the driver it replaces, whether for this
driver or one from another manufacturer. If media source macros exist for the older
driver, then the alignment of media source values will maintain support without the
need to change the macros.
Use the Driver Info utility, available on the Product CD, to compare the source values
for all installed drivers.
If the values for a given media source differ between the old and new printer drivers,
reassign the value in the new driver to match the value in the previous driver.
Compatibility settings can be adjusted by selecting Compatibility in the Device
Settings tab.
1 In the Device Settings tab, click Compatibility.
Printer Properties
1
2
1
2-14