Auto Configure - Kyocera KM-1530 User Manual

Printer Properties

Auto Configure

2-15
2 The Compatibility Settings dialog box appears. From the list in the Media source
enumeration area, select the paper supply method. The current value is listed in the
Enumerated value box.
3
Type a new Enumerated value for the media source and click OK. You can also
restore all the parameters to the default by clicking Reset.
The other options in the Compatibility Settings dialog box vary depending on
model. Options can include:
• Combine source and media type lists
This option changes the Basic tab of Printer Properties so that Media type and
Source are combined into one box, labelled Source.
• Enable manual duplex on network port
Use this option if you do not have a duplex unit and you want to print using
Manual Duplex (see
• Disable face-up reverse page order
This option prevents reverse order printing if face-up output is selected.
• Ignore application collation
Use this option to bypass the Collate setting in the application, and give priority to
the printer driver setting.
Auto Configure detects the installed device options on the printing system if it is
connected over a network. This button appears in the Device Settings Properties
page.
Auto Configure can detect printing system devices such as input devices, output
devices, RAM disk size, and hard disk size. Then it updates the Device options list
in the Device Settings properties page. Auto Configure keeps the printer driver's
Device Settings consistent with the actual printing system devices.
Note: Not all installed devices are detected by using Auto Configure. Before
selecting OK in the Device Settings tab, check the settings to make sure they are
correct.
page 3-9).
2
3
KX Driver