Gutters - Kyocera KM-1530 User Manual

User Guide
In the Custom Finishing Edge Settings dialog box:
The top two settings (e.g. A4/Letter) are for the smaller size paper in the mixed
page document.
The second row of settings (e.g. A3/Legal/Ledger) is for the larger size paper in
the mixed page.
Select the one setting that best illustrates the edge of the mixed pages you want to
align. Note that a change to one custom Finishing edge setting will adjust other
selections to make them compatible with the change.

Gutters

Based on the page size and print size specified in the Basic tab, you can reduce or
enlarge the image from 20% to 500% of the original size, or increase the top or left
margin, before printing
Note: For printer models that don't support Finishing Edge, Gutters is located on
the Layout tab.
Click Gutter to increase the outside margins in a range from 5.0 to 25.4 mm (0.20 to
1.00 inch). The left and/or top margins can be adjusted. This is useful when you want
to add extra margin space to the page for staples or hole punches. When used with
duplex printing, the enlarged gutter lines up evenly on both sides of the sheet. For
further details on duplex printing, refer to
• To increase outside margins on the left side of the page, enter a number into the
Left box. The Left option may not be available, depending on your Orientation
and Print on both sides settings in the Basic tab.
• To increase outside margins at the top of the page, enter a number into the Top
box. The Top option may not be available, depending on your Orientation and
Print on both sides settings in the Basic tab.
• Since the Gutter feature shifts document data to the right or down, select the
Reduce image to fit check box if the printed data extends beyond the edge of
the paper when changing the gutter setting. The size of the printed data is
decreased slightly to fit in the printable margins of the page.
Duplex Printing on page 3-8.
Finishing
5-3