Rotate Copies - Kyocera KM-1530 User Manual

Finishing
3
4
5
1
2
3
4
5
5-8
Click the Finishing tab, then select Separation. The Offset jobs option is
Click OK to return to the Print dialog box.
Click OK to start printing.
Your print job will be stacked in the output tray, offset from other jobs in the same tray.

Rotate Copies

Rotate copies stacks each copy of a print job at right angles in the output tray.
This feature requires the following:
• A Hard disk must be installed or a RAM disk enabled. For further details, refer to
Installing Optional Devices
• Paper size selections are limited to Letter, A4, 16K, or B5 (JIS).
• The selected paper size must be loaded into two paper sources, one horizontally
and one vertically.
• The print job must contain multiple pages and be specified to print multiple
copies.
From the application's Print dialog box, open Properties. (Select Print from the File
menu, and select Properties.)
In the Basic tab, under Destination, select an option that is not a finishing tray, for
example: Printer default or Inner tray.
Select a number of copies greater than 1.
Click the Finishing tab, then select Separation. The Rotate copies option is
selected.
Click OK to return to the Print dialog box.
on page 2-1.
selected.3
4
5
1
2
3
4
5
KX Driver