Express Installation; Windows Xp And Vista - Express Installation - Kyocera KM-1530 User Manual

Installation

Express Installation

1-2
6 Click Accept to proceed.
7 To begin installation, click Install Software.
8
The Software Installation Wizards appears. Click Next.
The installation differs depending on your operating system and connection method.
Select your operating system and connection method from the list below and
proceed to the referenced page to continue the installation

Windows XP and Vista - Express Installation

Vista - Custom Installation
Windows 98 - USB, Express
Windows XP - USB, Custom
Windows 98 - USB, Custom
Windows 98 and XP - Parallel Port (LPT)
Windows 98 and XP - Network Connection, Custom
For Windows NT see
Express mode is for a USB or network connection only. The installer can find the
printer if it is turned on and connected by USB or network cable. For the simple,
default installation, select Express Mode Installation. In the Custom method you
are able to choose which software packages to install and specify the port. To use
the Custom method, see
Windows XP and Vista - Express Installation
In Windows Vista the installation dialog boxes have a slightly different appearance,
but the steps are the same.
1
For the simple, default connection select Express Mode and then click Next.
After you select Express Mode and click Next, Discover Printing System opens
and looks for your printer. If Discovery does not find your printing system, ensure that
it is properly connected by USB or network cable and that it is turned on, and then
retry Discovery.
Windows XP and Vista - Express Installation
on page 1-4
on page 1-3
on page 1-9
on page 1-11
on page 1-12
Custom Installation on page 1-4.
Custom Installation
on page 1-2
on page 1-14
on page 1-4.
6
7
8
1
KX Driver