Siemens SITRANS FUS060 Operating Instructions Manual page 99

MaxTsdr_31.25
MaxTsdr_45.45
MaxTsdr_93.75
Redundancy
Repeater_Ctrl_Sig
24V_Pins
Freeze_Mode_supp
Sync_Mode_supp
Auto_Baud_supp
Set_Slave_Add_supp
Min_Slave_Intervall = 250
Modular_Station
Max_Module
Max_Input_Len
Max_Output_Len
Max_Data_Len
Fail_Safe
Slave_Family
Max_Diag_Data_Len
;------- Description of device related diagnosis: ------------------;
Unit_Diag_Bit(16)
Unit_Diag_Bit(17)
Unit_Diag_Bit(24)
Unit_Diag_Bit(25)
Unit_Diag_Bit(26)
Unit_Diag_Bit(27)
Unit_Diag_Bit(28)
Unit_Diag_Bit(29)
Unit_Diag_Bit(30)
Unit_Diag_Bit(31)
Unit_Diag_Bit(32)
Unit_Diag_Bit(33)
Unit_Diag_Bit(34)
Unit_Diag_Bit(35)
Unit_Diag_Bit(36)
Unit_Diag_Bit(37)
Unit_Diag_Bit(38)
Unit_Diag_Bit(39)
Unit_Diag_Bit(55)
User_Prm_Data_Len = 0
;-------- Description of modules
------------------------------------;
; The mandatory modules order is defined at the end of the file by
Assignment of
; Modules using SlotDefinition Keyword.
;
;
from the
; device with the input data, use Free place for this module instead
of another
; identifier.
;
SITRANS FUS060 with PROFIBUS PA
Operating Instructions, 09/2021, A5E02225054-AD
= 100
= 250
= 1000
= 0
= 0
= 0
= 0
= 0
= 0
= 1
= 1
= 6
= 30
= 3
= 33
= 0
= 12
= 20
= "Error appears"
= "Error disappears"
= "Hardware failure electronics"
= "Hardware failure mechanics"
= "Motor temperature too high"
= "Electronic temperature too high"
= "Memory error"
= "Measurement failure"
= "Device not initialized"
= "Device initialization failed"
= "Zero point error"
= "Power supply failed"
= "Configuration invalid"
= "Restart"
= "Coldstart"
= "Maintenance required"
= "Characteristics invalid"
= "Ident_Number violation"
= "Extension Available"
Use exactly one identifier per module.
If you don´t want to get the measuring value of a certain module
PROFIBUS communication
B.9 GSD files
99