Identification (Menu 5) - Siemens SITRANS FUS060 Operating Instructions Manual

Pulse width (menu 4.2.4)
This parameter is only required for the "Pulse" output function. You can set the pulse/pause ratio
of the pulse output with the pulse width. The pulse width can be set in a range from 0.1 to 2000
ms. A maximum pulse width is calculated in relation to the set full scale value and the set pulse
valence. The maximum pulse frequency is 5 kHz.
Full scale frq (menu 4.2.5)
The frequency is permanently assigned to the flow. The pulse/pause ratio is constant 1:1. If the
"Frequency" function is selected, the "Full scale frq" is set in the range from 2 to 10 000 Hz.
7.5

Identification (menu 5)

In this menu the device-specific data can be entered or read.
Unit identity (menu 5.1)
You can call or enter device-specific or TAG-related data in this menu.
You have the following options:
• TAG number, menu 5.1.1 (max. 8 characters)
• TAG description, menu 5.1.2 (max. 32 characters)
• TAG message, menu 5.1.3 (max. 32 characters)
TAG-specific data can be entered in these menus. The
Numbers, letters and text characters are selected with the
If no text is stored, a "<" is displayed. By actuating the
to the right and a character can be selected from the character set. The following characters are
available:
The selected character is entered by actuating the
character can then be selected with the
the
For texts longer than 16 characters the marks < and > in the most left and/or the most right
position of the display indicate that there are further characters to the left and/or right of the
displayed text section. These are displayed by actuating the
SITRANS FUS060 with PROFIBUS PA
Operating Instructions, 09/2021, A5E02225054-AD
< < < <
ä,à...é...ß...ü ä,à...é...ß...ü a-z a-z
key when the "<" flashes.
and
and
Output Output
position position
> > > >
blank blank 0-9 0-9 A-Z A-Z
key and the "<" flashes again. The next
and keys. The text input is finalized by actuating
7.5 Identification (menu 5)
keys function as cursor control.
and keys.
keys, the "<" moves one position
> >
< >.,-:/* < >.,-:/*
and keys.
Functions
63