Menu 5 - Identification - Siemens SITRANS FUS060 Operating Instructions Manual

HMI menu structure
D.1 Menu items (FW Rev. 4.00.00)
Menu Device function,
code
Parameters
4.2.3 Pulse value
Unit
Pulse rate
4.2.4 Pulse width
4.2.5 Full scale freq.
D.1.5

Menu 5 - Identification

Menu Device function,
code
Parameters
5.1 Unit identity
5.1.1 Tag
5.1.2 Descriptor
5.1.3 Message
5.2 Manuf. Ident.
5.2.1 Product type
5.2.2 Serial number
5.2.3 Software rev.
5.2.4 Manuf. date
5.2.5 Nominal size
5.3 Device ID (HART
adress)
112
Description
Physical unit per impulse
(only necessary if "Pulse"is used)
Number of volume units per impulse
(only necessary if "Pulse"is used)
Setting pulse width
(only necessary if "Frequency" is
used)
Full scale frequency
Description
Tag number on metering unit
Tag number description
Messages to tag
Product type
Device serial number
Software revision
Manufacturing date - DD.MM.YYYY
Sensor size
True identification in HART long ad‐
dress (not relevant for PROFIBUS com‐
munication)
Factory setting Setting options
m /Imp l/Imp, m³/Imp, Gal/
3
Imp, ImpGal/Imp, kg/
Imp, t/Imp, lb/Imp
1 m /Imp 0 to 1000.0
3
0.10 ms 0.1 to 2000 ms
10000 Hz 2 to 10 000 Hz
Factory setting Setting options
To be defined by user HART: max 8 charac. Write
To be defined by user HART: max32 charac. Write
To be defined by user HART: max 32 charac. Write
Order number Read only
Format: xxxxxxHwwy Factory set (up to
xxxxxx = number max. 13 characters)
ww = production Read only
week
y = production year
4.00.00 Read only
Read only
Depending on diam‐ Read only
eter, only informal
detail, no influence
on measurements
0 Factory set (0 to 15)
Read only
SITRANS FUS060 with PROFIBUS PA
Operating Instructions, 09/2021, A5E02225054-AD
Read
or write
Write
Write
Write
Write
Read
or write
Read
Read
Read
Read
Read
Read