Printhead - Kodak EasyShare 5100 User Manual

Printhead

The printhead dispenses the ink from the ink cartridges onto the paper. Printer maintenance involves:
Calibration
Clean the printhead
Calibration
The Kodak EasyShare AiO performs a calibration every time you install or replace a printhead. However,
you can run a calibration if you are seeing changes in the image quality. Calibration aligns the printheads
and performs a nozzle health check to enable high-quality prints.
To calibrate from computer
Load the main tray or photo tray with photo paper.
1
IMPORTANT: If you don't have any photo paper, you can use plain paper, but photo paper is highly
recommended for calibrations.
Start the AiO Home Center.
2
Click to open the Help panel.
3
Under General Links, click Maintenance.
4
Click Calibration to make a calibration print.
5
Follow the instructions on the calibration print to calibrate the printer.
6
To calibrate from control panel
Load the main tray or photo tray with photo paper.
1
IMPORTANT: If you don't have any photo paper, you can use plain paper, but photo paper is highly
recommended for calibrations.
Press and hold
2 Photo
Follow the instructions on the calibration print to calibrate the printer.
3
Clean Printhead
If you notice a degradation in the quality of prints, the printhead may need cleaning.
Start the AiO Home Center.
1
Click to open the Help panel.
2
Under General Links, click Maintenance.
3
Click Printhead Cleaning.
4
User's Guide
and together to make a calibration print.
Cancel
Maintenance
85