Status Lights - Kodak EasyShare 5100 User Manual

Chapter 1

Status Lights

The following tables contain information on the EasyShare AiO lights.
Light Status
All lights and displays are off.
All lights Flash once.
All lights are flashing and the
On/Off Light is flashing yellow.
Light Status
Power cord light is off.
Power cord light is on.
4
Control Panel
Cause
The printer is turned off.
The Printer does not have power
applied.
The Printer is Initializing.
The Printer has detected an
error condition.
Power Light on Power Cord
Cause
The printer to power supply cord
is not properly connected to the
Power Supply.
The power supply to your wall
outlet cord is not properly
connected to your wall outlet.
You do not have the appropriate
power available at your wall
outlet.
There may be an issue with the
power supply.
The power cord and power
supply are properly connected
and ready to supply power to the
printer.
Action/Solution
Press the On/Off button to turn
the printer on.
Check the Power Cord Light
status.
None: Allow the Printer to finish
the initialization process.
Disconnect power for 5 seconds
and reconnect power. If the
condition persists, please check
the 8 Segment Display for
additional codes. Contact Kodak
for assistance.
Action/Solution
Reseat the printer to power
supply cord.
Reseat the Power Supply to your
Wall Outlet Cord.
Test your wall outlet by plugging
a known working device into you
wall outlet. Have your wall outlet
checked by a qualified
electrician.
Visit Kodak.com for additional
troubleshooting steps or contact
your local Kodak Call Center.
Ensure that the power cord in
properly plugged into the back of
the printer.
Kodak EasyShare 5100 AiO