Advertisement
Quick Links
Installing a New Printhead in Your KODAK 5000 Series All-in-One Printer
1
a) Follow these instructions for
step-by-step guidance on how to
remove and replace your printhead
2
Remove Ink Cartridges and Used Printhead
a) Remove both ink cartridges and
set them aside.
Eastman Kodak Company
Rochester, NY 14650 U.S.A.
© Eastman Kodak Company, 2009
MC/MR/TM: Kodak.
b) If your printer is not
powered on, press
.
Start.
b) Unlatch the used printhead. Press the button on the
left, as shown.
c) Lift the printer access door and wait for the carriage
to move to the access position.
d) Remove any paper that
may be loaded in the
printer.
c) Lift the used printhead out of the
carriage.
1
Advertisement
Related Manuals for Kodak 5000 Series
Summary of Contents for Kodak 5000 Series
- Page 1 Installing a New Printhead in Your KODAK 5000 Series All-in-One Printer a) Follow these instructions for b) If your printer is not c) Lift the printer access door and wait for the carriage d) Remove any paper that step-by-step guidance on how to powered on, press to move to the access position.
- Page 2 Re-Insert the Ink Cartridges a) Insert the black ink cartridge into the b) Press down on the ink cartridge until you c) Repeat steps 4a-4b for the color ink printhead. hear it click into position. cartridge. Close the printer access door. www.kodak.com/go/aiosupport...
- Page 3 Need More Help? For printer support, please go to www.kodak.com/go/aiosupport or www.kodak.com/go/contact. www.kodak.com/go/aiosupport...