Getting Started; Connect Power; Install The Printhead - Kodak EasyShare 5500 User Manual

2

Getting started

Getting started
It is important to find a good location for your AiO printer. Place the printer on a clean, flat surface in a dry
location and out of direct sunlight. Make sure the printer has proper ventilation.
Avoid areas where ventilation ducts, open doors or high traffic might expose the AiO printer and paper to
high levels of dust and debris. Airborne particles can affect picture quality.
Allow enough space on all sides of the AiO printer to allow you to connect and disconnect cables, change
the ink cartridges and remove and load paper.

Connect power

RISK OF ELECTRICAL SHOCK
Use only the AC power adaptor included with your AiO printer. Other adaptors or leads could
damage your printer or computer.
Connect the printer power cord to the AC power adaptor, then to the back of the AiO printer.
1
Plug the AC adaptor power lead into a power outlet.
2

Install the printhead

The printhead dispenses the ink from the cartridges onto the paper.
Make sure the AiO printer is on.
1
Open the printer access door. The carriage moves to a centre position.
2
User's Guide 11