Replacing The Printhead - Kodak ESP 3200 Series Start Here Manual

Replacing the printhead

Replacing the printhead is not a regular maintenance procedure. Replace
IMPORTANT:
the printhead only if you receive a new printhead from Kodak.
To replace the printhead:
1. Make sure your printer is on.
2. Lift the printer access door, and wait for the carriage to move to the access
position.
3. Remove any paper that may be loaded in the printer.
4. Remove both ink cartridges and set them aside.
www.kodak.com/go/aiosupport
KODAK ESP 3200 Series All-in-One Printer
29