Replacing The Printhead - Kodak ESP 9 Start Here Manual

8 Press down on the tab until you hear a click and feel the latch snap into position.
Note:
into place in the printhead. This seats the cartridges properly, and prevents ink from
being dispensed incompletely during your print or copy jobs.
9 Close the printer access door. The printhead moves to its ready position and prepares
the new ink cartridge for use (this could take up to a minute).

Replacing the printhead

If your printhead is damaged or broken, you may replace it yourself.
1 Make sure your printer is turned on.
2 Open the printer access door by lifting from the recessed hand-holds on the sides of the
unit.
Kodak ESP 9 Printer User Guide
Listen carefully during this step; make sure you hear the ink cartridges click
Chapter 9
79