Table of Contents Product Overview... 1 Main Components... 1 Control Panel Layout... 2 Status Lights... 3 LCD Display Screen... 8 Memory Card Slots and USB Port ... 9 Home Center Software... 11 Getting Started ... 13 Connect Power ...13 Install the Printhead ...13 Install Ink Cartridges ...15 Install the Duplexer ...
Product Overview Product Overview The Kodak EasyShare 5300 All-in-One (AiO) Printer allows you to print, copy, and scan photos or documents. Many functions can be operated directly from the Control Panel. You can print, store, manage, and share your digital photos with family members and friends with the Kodak EasyShare software. You can buy optional accessories to enhance your Kodak EasyShare AiO experience.
Used for selection in conjunction with the 4-way Navigation button. Turns your EasyShare AiO on or off. Green when Starting Up, Ready, or in Standby mode. Flashes red when in an error state. Is not lit when in Sleep mode. Kodak EasyShare 5300 AiO...
The following tables contain information on the EasyShare AiO lights. Light Status All lights are off. The On/Off Light is flashing and the Display has the following message: Kodak EasyShare System Starting Up (Please Wait) The five boxes at the bottom are flash walking left to right. User’s Guide Description On or flashing for an error or warning condition.
Page 8
Have your wall outlet checked by a qualified electrician. Visit Kodak.com for additional troubleshooting steps or contact your local Kodak Call Center. Ensure that the power cord is properly plugged into the back of the printer. Kodak EasyShare 5300 AiO...
Page 9
(about 30 seconds). If the flashing green persists, you may have an issue with the printer. Visit Kodak.com for additional troubleshooting steps or contact your local Kodak Call Center. Disconnect power for 5 seconds and reconnect power.
Page 10
None: Please wait and allow the printer to complete the initialization process. If the flashing green persists, you may have an issue with the printer. Visit Kodak.com for additional troubleshooting steps or contact your local Kodak Call Center. Kodak EasyShare 5300 AiO...
Page 11
Light Status Light is off. Light is blinking steady. Light is blinking rapidly. Light is on. User’s Guide Attention Light Cause No Error. Recoverable Error. Warning Non-Recoverable Error Product Overview Action/Solution None Paper jam while printing. Main tray empty. Photo tray empty. Carrier stall during pick.
Remove and reinsert the SD/MMC card. None None Remove the card and make sure the card is not “write” protected or damaged. Reinsert the card or replace with a new card if necessary. symbol, positioned in Kodak EasyShare 5300 AiO...
EasyShare AiO, or connect your camera directly through one of the two USB ports on the front panel, using a USB cable. Your Kodak EasyShare AiO can read the contents of the memory card while it is still in the camera.
Chapter 1 Supported Memory Cards Your Kodak EasyShare AiO can read the following memory cards. xD-Picture Card Memory Stick Memory Stick Pro Secure Digital Card/MultiMediaCard Compact Flash type I and type II, including microdrives Your EasyShare AiO also supports the following memory cards with Memory Stick and SD/MMC card slot adapters you can purchase.
The EasyShare AiO Home Center software is an application that runs on the computer. It enables you to copy, scan, and configure your EasyShare AiO from the computer. You can also launch Kodak EasyShare software for transferring, viewing, and working with your digital pictures/videos.
Getting Started Getting Started It is important to find a good location for your AiO Printer. Place the printer on a clean flat surface, in a dry location, and out of direct sunlight. Make sure the printer has proper ventilation. Avoid areas where ventilation ducts, open doors, or high traffic might expose the EasyShare AiO and paper to high levels of dust and debris.
Page 18
Remove and discard the clear plastic casing and the orange protective cap. Place the printhead into the carriage. Push against the back wall of the printhead until it clicks into place. 7 Install the ink cartridges Kodak EasyShare 5300 AiO...
Install Ink Cartridges After installing the printhead, you need to install the black and color ink cartridges. 1 Printhead 2 Color ink cartridge 3 Black ink cartridge Tear open the black ink cartridge bag at the notch and remove the ink cartridge. IMPORTANT: Insert the ink cartridge immediately to prevent any drying of the ink.
85° F (30° C). Install the Duplexer The Kodak EasyShare AiO supports an optional duplexer (Kodak EasyShare 5000 Series Two-Sided Printing Accessory) that enables printing on both sides of the paper. When installed, the duplexer is automatically detected by the printer and computer system software.
Center (See General Settings). Startup When you power on your Kodak EasyShare All-in-One, status information is displayed on the LCD. After the startup is complete, the EasyShare AiO enters the Copy mode, unless a photo device is attached. If a photo device is attached or memory card inserted, the EasyShare AiO enters Photo mode.
Chapter 2 Menus The Kodak EasyShare AiO menus are accessed by the Menu, Photo, Copy, Scan, and Help buttons. Menu Button Help Photo Print Settings Control Panel Settings Ink Levels Proofsheet Clean Printhead Calibrate Printer Format Memory Card Print Demo Sheet...
Page 23
Date and Time Language Reset all Settings Photo Button Layout Borderless Bordered 2 per Page 3 per Page 4 per Page 9 per Page Index 2x2 Poster 3x3 Poster 4x4 Poster Quantity 1 - 99 Color Color Black & White Quality Normal Best...
Scan Button Scan What Document Photo Scan To File Application Memory Card Application List of applications Save Settings Help Button Installing Ink Cartridges Making a Copy Making a Photo Making a Scan Calibrating Printer Demo Sheet You can print a sample page on US Letter or A4 size paper to evaluate print quality. The Demo Sheet is a single sheet of paper that displays information about the features and capabilities of your EasyShare AiO printer.
The percentage complete is displayed under the progress bar indicating the percentage of the print operation complete. The page number of the current page printing and the total number of pages in the print job is displayed under the progress bar. Photo paper tray: Status of the photo paper tray. Kodak EasyShare 5300 AiO...
Page 27
A Warning icon is displayed over the ink level icon when a low ink condition exists. A Critical icon is displayed over the ink level icon when an out of ink condition exists. Click Order... to buy supplies from Kodak online. Errors If an error occurs, the Status Monitor displays an error message, error correction instructions, and a link to the Support section of the AiO Home Center Help.
DPOF file that identifies which photos have been tagged for printing. Your Kodak EasyShare AiO can read the DPOF file from the memory card in a camera so you do not have to re-select the photos to print.
Page 29
Scene Balance Your EasyShare AiO is configurable to apply automatic scene balance improvements (brightness) for photos printed on the AiO from camera cards and USB connected devices.. The default is to apply the scene balance improvements. Press Menu to display the main menu. Press to select Photo Print Settings.
Press to change the standby timeout period. Press OK. Date and Time Your Kodak EasyShare All-in-One contains a clock for stamping the date and time on scans to a memory card. 1 Press Menu to display the main menu. Press until Date and Time is selected.
Page 31
Press OK. Reset All Settings You can restore the original factory settings to your Kodak EasyShare All-in-One. NOTE: Restoring the factory defaults will not change the date and time information you set. Press Menu to display the Main Menu.
The EasyShare AiO date and time factory default is synchronized to the current computer. The date and time format is based on the language and country/region setting. To enable or disable the date and time synchronization On the main Home Center window, click Configure Settings to display the settings options. Kodak EasyShare 5300 AiO...
Page 33
Click AiO Printer. On the General tab, select or clear the Synchronize to this computer checkbox to enable or disable date and time synchronization. Click OK or Apply. Power You can set your EasyShare AiO to enter Standby mode after a timeout of 1 to 60 minutes. To change the power settings On the main Home Center window, click Configure Settings to display the settings options.
Page 34
You can change this to a more user-friendly name by entering a new name in the edit box. Duplexer ink dry time: Indicates how long to wait before a sheet is flipped by the optional duplexer. Click OK or Apply. Kodak EasyShare 5300 AiO...
Keep paper away from direct sunlight, and out of high-temperature environments (such as a vehicle parked in the sun). You can load many different types and sizes of paper in your Kodak EasyShare AiO, including letter paper, photo paper, transparencies, and envelopes (see Paper Types in the Appendix). The EasyShare AiO automatically detects the size and type of paper you load in the input tray, and then adjusts to generate the highest quality output for that paper.
Insert the stack of paper into the input tray with the short edge forward and the print side down. Slide the stack of paper forward until it stops. Slide the paper-width and paper-length guides inward until they stop at the edges of the paper. Kodak EasyShare 5300 AiO...
Page 37
Handling and Loading Paper Lower the output tray. Pull the extender tray out. User’s Guide...
Insert the stack of photo paper into the photo tray glossy side down. Slide the photo tray with the stack of photo paper in until it stops. Engaging the photo tray turns the photo tray light on. Kodak EasyShare 5300 AiO...
Close the photo tray lid. Load Envelopes You can load plain envelopes into the main input tray of your Kodak EasyShare AiO. Do not use envelopes with cutouts or cellophane windows. Lift the output tray. Remove any paper in the input tray.
Use letter or A4 (designed for use with ink jet printers) label sheets. Ensure that none of the pages are sticking together. Place a stack of label sheets on top of standard paper in the input tray, label side down. Kodak EasyShare 5300 AiO...
Print Print The memory card slots accept most of the popular memory cards (see Supported Memory Cards). When you insert a memory card into the card slot, connect PTP camera, or USB flash drive, the first photo is displayed on the LCD display. When you press the Photo button the Photo Print menu is displayed. The Photo button toggles between displaying photos and the Photo Print menu.
The Photo Print mode is initiated by pressing the Photo button, inserting a memory card, or connecting a USB device to the Kodak EasyShare All-in-One. Insert a memory card into the appropriate slot, a mass storage device into the USB port, or connect a digital camera to the USB port.
Index Print The purpose of an index print is to catalog contents of a memory card or USB flash drive. An Index print contains the following: Sequence numbers for the relative position of each photo within the defined set of photos, incrementing from 001 and continuing progressively across all pages of a multi-page index print.
DPOF file that identifies which photos have been tagged for printing. Your Kodak EasyShare AiO can read the DPOF file from the memory card in a camera so you do not have to re-select the photos to print.
Bluetooth Printing Bluetooth is a short-range radio technology that enables wireless connectivity between electronic devices. This feature supports an optional Kodak USB Bluetooth Adapter that accepts JPEG/EXIF image file types from the following types of Bluetooth enabled devices. Mobile camera phones...
Change any other settings, such as paper size and print layout, then click Print. Layouts The photo layouts on your Kodak EasyShare AiO “snap” to the nearest standard print size whenever possible based on the combination of layout and paper size loaded. Otherwise the layouts are based on a standard 2x3 aspect ratio.
Page 47
US photo paper sizes 3.5 X 5 inches 4 X 6 inches 5 X 7 inches 8 X 10 inches ISO 216 paper sizes A4 (21 X 30 centimeters) A5 (15 X 21 centimeters) A6 (10 X 15 centimeters) B5 (17.6 X 25 centimeters) The international paper size standard, ISO 216, consists of an A series and a less common B series.
Page 49
Set Print Layout Press Photo. The Print menu is displayed with Layout selected. Press to change the print layout. Press OK to set the selected layout and continue to set options, press Photo to preview, or Start to print. User’s Guide Print...
Page 50
Chapter 4 3.5x5 Inch Paper 1 per page borderless 3 per page 1 per page bordered 4 per page 2 per page 9 per page Kodak EasyShare 5300 AiO...
Page 51
4x6 Inch Paper 1 per page borderless 3 per page User’s Guide 1 per page bordered 4 per page Print 2 per page 9 per page...
Page 52
Chapter 4 5x7 Inch Paper 1 per page borderless 3 per page 1 per page bordered 4 per page 2 per page 9 per page Kodak EasyShare 5300 AiO...
Page 53
Print 8x10 Inch Paper 1 per page borderless 1 per page bordered 2 per page 3 per page 4 per page 9 per page User’s Guide...
Page 54
Chapter 4 US Letter 1 per page borderless 3 per page 1 per page bordered 4 per page 2 per page 9 per page Kodak EasyShare 5300 AiO...
Page 56
Chapter 4 A4 Paper 1 per page borderless 1 per page bordered 2 per page 3 per page 4 per page 9 per page Kodak EasyShare 5300 AiO...
Page 57
Print A5 Paper 1 per page borderless 1 per page bordered 2 per page 3 per page 4 per page 9 per page User’s Guide...
Page 58
Chapter 4 A6 Paper 1 per page borderless 3 per page 1 per page bordered 4 per page 2 per page 9 per page Kodak EasyShare 5300 AiO...
Page 59
Print B5 Paper 2 per page 1 per page borderless 1 per page bordered 3 per page 4 per page 9 per page Index Sheet The Index Sheet layout shows thumbnail images, filenames, and sequence numbers of each photo on a memory card.
Page 60
Chapter 4 US Letter/A4 Index Sheet Kodak EasyShare 5300 AiO...
4x6 Index Sheet Setting Print Options Before you print photos you may want to change the following default settings. Layout: Borderless Quantity: 1 print Color: Color print Quality: Normal Save Settings: No The Photo Print menu contains parameters that allow you to specify other options. Set Number of Prints You can increase the number of prints of each photo from the Photo Print menu.
Press OK to set the selected layout and continue to set options, press Photo to preview, or Start to print. Set Print Quality The Kodak EasyShare All-in-One provides three options that affect print speed and quality for plain paper. Print quality is automatically set to Kodak Picture Quality when photo paper is detected. Draft Produces the fastest print speed, but the lowest quality.
Page 63
Print Quality Kodak picture quality is automatically selected when photo paper is detected in the main or photo input trays. The following print quality options are available for printing on plain paper. Draft Produces the fastest print speed, but the lowest quality.
Page 64
Click OK or Apply. Print Options The photo layouts on your Kodak EasyShare AiO “snap” to the nearest standard print size based on the combination of layout and paper size loaded whenever possible. Otherwise the layouts are based on a standard 2x3 aspect ratio.
Automatically apply screen balance to digital camera pictures: Scene balance is the ability to adjust the color and density of digital images for brighter color and truer flesh tones. Enable printing of tagged pictures: Enables the Kodak EasyShare AiO to detect tagged photo files (DPOF) and prompt you for options.
Page 66
Press Zoom + to enlarge the photo in .25X increments up to 5X magnification. Pressing Zoom – decreases magnification in .25X increments down to 1X. Use the 4-way Navigation button to display the part of the picture you want to print. Kodak EasyShare 5300 AiO...
Page 67
Press OK when finished. The photo is displayed with a crop box around the magnification and position you selected. Press to select the number of prints, and press Start to print the area displayed in the crop box. Multiview The Multiview screen shows thumbnails of nine photos. The current photo number and the total photo number are also displayed.
Page 68
Chapter 4 Press OK to preview the selected photo Press Start to print. Kodak EasyShare 5300 AiO...
Scale Percent: The default copy scale is 100%, however you can scale copies from 10% to 500%. Scaling is anchored to the upper left corner of the original. Photo Layouts: You can set the layout for making copies of photos on your Kodak EasyShare All-in-One. The following layouts are supported.
Page 70
If desired, make changes to the following copy options with the Copy menu. See Set Number of Copies See Set Color See Set Quality See Change Brightness See Set Preview Press Start. If you turned preview on, the EasyShare AiO enters Preview mode, otherwise it starts making copies. Kodak EasyShare 5300 AiO...
Page 71
Fit to Page Copy The image is copied and fit to the paper size loaded. There may be cropping on the sides or top/bottom depending on the difference in the aspect ratios of the image and the page size. Place your original face down on the right front corner of the scanner glass. Press Copy to display the Copy menu.
Page 72
If desired, make changes to the following copy options with the Copy menu. See Set Number of Copies See Set Color See Set Quality See Change Brightness See Set Preview Press Start. If you turned preview on, the EasyShare AiO enters Preview mode, otherwise it starts making copies. Kodak EasyShare 5300 AiO...
Page 73
Photo Layout Copy You can set the layout for making copies of photos on your Kodak EasyShare All-in-One. The following layouts are supported. Borderless (default) Bordered 2 per Page 3 per Page 4 per Page 9 per Page 2x2 Poster...
Press OK to set and continue setting options, or Start to copy. Set Quality Kodak picture quality is automatically selected when photo paper is detected in the main or photo input trays. The Kodak EasyShare All-in-One provides three options that affect speed and quality for copying documents to plain paper.
Change Brightness You can change the brightness of copies with -3 being the darkest and +3 the lightest. If the Copy menu is not displayed, press Copy. Press until Brightness is selected. Press to darken or to lighten. Press OK to set and continue setting options, or Start to copy. Set Preview Copy Preview allows you to preview your originals before making copies.
Page 76
Press Zoom + to enlarge the photo in .25X increments up to 5X magnification. Pressing Zoom – decreases magnification in .25X increments down to 1X. Use the 4-way Navigation button to display the part of the picture you want to copy. Press OK or Start to copy. Kodak EasyShare 5300 AiO...
Copy with Computer You can make copies of pictures on your Kodak EasyShare AiO with Home Center Software. Copy Pictures Copying pictures with the AiO Home Center allows you to set copy options not available on the Control Panel. To copy pictures Place your original photo photos face down in the scanner glass.
Kodak Perfect Touch technology also enhances the desirable qualities of photos, for vibrant color and richer detail. NOTE: Color restoration and Kodak Perfect Touch can be used together to enhance pictures. Paper size: Select the paper size loaded. The default selection is Current Tray. When the Photo Tray is engaged, it becomes the current tray.
Page 79
Output Quality Kodak picture quality is automatically selected when photo paper is detected in the main or photo input trays. The following print quality options are available for printing on non-photo paper. Draft Produces the lowest quality, but the fastest copy speed.
Page 80
Print colors as grayscale: Copying a color photo in grayscale makes it look like a traditional black- and-white photograph. The grayscale palette contains white, black, and 254 shades of grey. Each color in the image is replaced with a gray that matches its lightness value. Click OK or Apply. Kodak EasyShare 5300 AiO...
You can start a scan from the Kodak AiO Control Panel or your computer. Scan with Control Panel Pressing Scan places the Kodak EasyShare AiO in Scan mode and displays the Scan menu on the screen. Save Scan Settings When you change scan settings from the control panel, the settings apply only to the current scan job. To apply scan settings to all future scan jobs, you can save your changes.
Press Scan to display the Scan menu. Press to select Photo. Press to select Scan To. Press to select Memory Card. Press Start. Scanning Documents With the Control Panel Scan menu, you can scan documents to a file, application, or memory card. Kodak EasyShare 5300 AiO...
Page 83
Press to select Document. Press Start. The document is scanned and saved based on the Kodak AiO Home Center scan document settings (see Scan Document Settings). Scan to Application Load your original face down on the right front corner of the scanner glass.
Scan status light blinks during data transfer. To use the scan features, your EasyShare AiO and computer must be connected and turned on. The Kodak AiO Home Center software must also be installed and running on your computer prior to scanning.
Page 85
Red Eye reduction: Select to automatically minimize red eye in flash photos. This check-box is available when scanning color pictures. Kodak Perfect Touch: Automatically corrects for common image flaws and "mistakes," such as shadows, and backlighting. Kodak Perfect Touch technology also enhances the desirable qualities of photos, for vibrant color and richer detail.
Page 86
Scan to Printer Place your photo or photos face down on the scanner glass. Your Kodak All-in-One Printer can detect multiple photos. On the main Home Center window, click Scan Pictures and Documents to open the Basic Scan window.
Page 87
Red Eye reduction: Select to automatically minimize red eye in flash photos. This checkbox is available when scanning color pictures. Kodak Perfect Touch: Automatically corrects for common image flaws and "mistakes," such as shadows, and backlighting. Kodak Perfect Touch technology also enhances the desirable qualities of photos, for vibrant color and richer detail.
Page 88
Chapter 6 Scan to EasyShare Place your photo or photos face down on the scanner glass. Your Kodak All-in-One Printer can detect multiple photos. On the main Home Center window, click Scan Pictures and Documents to open the Basic Scan window.
Page 89
Click Send to Destination to send the scanned picture(s) to Kodak EasyShare. Scan to Application Place your photo or photos face down on the scanner glass. Your Kodak All-in-One Printer can detect multiple photos. On the main Home Center window, click Scan Photos and Documents to open the Basic Scan window.
Page 90
Red Eye reduction: Select to automatically minimize red eye in flash photos. This checkbox is available when scanning color pictures. Kodak Perfect Touch: Automatically corrects for common image flaws and "mistakes," such as shadows, and backlighting. Kodak Perfect Touch technology also enhances the desirable qualities of photos, for vibrant color and richer detail.
Page 91
Sharpening: This drop-down list is available when scanning color pictures. It contains a list of supported sharpen levels for enhancing fuzzy images; None, Normal, High, and Exaggerated. Kodak Perfect Touch technology: Automatically corrects for common image flaws and "mistakes," such as shadows, and backlighting. Kodak Perfect Touch technology also enhances the desirable qualities of photos, for vibrant color and richer detail.
Page 92
Saturation: Move the slider with the mouse, or enter a number between -10 and +10 in the text box to adjust saturation. Kodak Perfect Touch technology: Automatically corrects for common image flaws and "mistakes," such as shadows, and backlighting. Kodak Perfect Touch technology also enhances the desirable qualities of photos, for vibrant color and richer detail.
Page 93
Select Document. Select Color, Grayscale, or Black & White. If desired, change the Resolution. If you changed the Resolution, you can save it as a scan shortcut. Click Scan Now to start the scan. The page on the scanner glass is scanned and scan progress information appears that shows the progress of the scan.
Page 94
If you have more pages to scan, place the next page on the scanner glass and click Scan Next or Preview>. When you have finished scanning, click Continue to select output options. Make sure File is selected in the Destinations list box. Kodak EasyShare 5300 AiO...
Page 95
Select a folder for saving the file from the Location drop-down list, or click Browse to select a folder from the Open dialog. Enter a name for the file in the Filename edit box. Select a file format from the File type drop-down list. To produce a file that can be edited, select RTF (.rtf).
Page 96
Click Scan Now to start the scan. The page on the scanner glass is scanned and scan progress information appears that shows the progress of the scan. When the scan is completed, scan complete information and controls appear. Kodak EasyShare 5300 AiO...
Page 97
If you have more pages to scan, place the next page on the scanner glass and click Scan Next or Preview>. When you have finished scanning, click Continue to select output options. Select Email n the Destinations list box. User’s Guide Scan...
Page 98
Place your original face down on the right front corner of the scanner glass. On the main Home Center window, click Scan Pictures and Documents to open the Basic Scan window. Click Go to Advanced to open the Advanced Scan window. Kodak EasyShare 5300 AiO...
Page 99
Select Document. Select Color, Grayscale, or Black & White. If desired, change the Resolution. If you changed the Resolution, you can save it as a scan shortcut. Click Scan Now to start the scan. The picture is scanned and scan progress information appears that shows the progress of the scan. When the scan is completed, scan complete information and controls appear.
Page 100
If you have more pages to scan, place the next page on the scanner glass and click Scan Next or Preview>. When you have finished scanning, click Continue to select output options. Select Printer in the Destinations list box. Kodak EasyShare 5300 AiO...
Page 101
Click Print to print the scanned picture(s) to your EasyShare AiO. Scan to EasyShare Place your original face down on the right front corner of the scanner glass. On the main Home Center window, click Scan Pictures and Documents to open the Basic Scan window.
Page 102
The document is scanned and scan progress information appears that shows the progress of the scan. When the scan is completed, scan complete information and controls appear. If you have more pictures to scan, place the next one on the scanner glass and click Scan Next or Preview>. Kodak EasyShare 5300 AiO...
Page 103
Enter a base filename in the edit box. If desired, select Open EasyShare software. Click Send to Destination to send the scanned page(s) to Kodak EasyShare. Scan to Application Place your original face down on the right front corner of the scanner glass.
Page 104
Click Scan Now to start the scan. The page on the scanner glass is scanned and scan progress information appears that shows the progress of the scan. When the scan is completed, scan complete information and controls appear. Kodak EasyShare 5300 AiO...
Page 105
If you have more pages to scan, place the next page on the scanner glass and click Scan Next or Preview>. When you have finished scanning, click Continue to select output options. User’s Guide Scan...
Page 106
Select an application from the Destinations list box. To add or delete applications from the list, click Modify List (see Scan Documents Settings). Click Send to Destination to save the scanned page(s) to the selected application. Kodak EasyShare 5300 AiO...
Scan Scan Settings You can use the AiO Home Center to change the default scan settings and establish applications for scanning. Scan General Settings On the Home Center main window, click Configure Settings. User’s Guide...
Page 108
Default scan destination: You can set the default to scan to a file, application, or memory card. Application List: Opens a dialog where you can add and remove applications from the destination list for scanned items. Click OK or Apply. Kodak EasyShare 5300 AiO...
Page 109
Scan Document Settings Basic Settings On the Home Center main window, click Configure Settings. Click Scan. Click the Document tab. Set the following options as desired. User’s Guide Scan...
Page 110
Location: Edit field and Browse button for choosing a folder. Save into new folder with current date as file name: Select to save scanned files to the base name and location you specified. Click Apply or OK. Kodak EasyShare 5300 AiO...
Page 111
Scan Picture Settings Basic Settings On the Home Center main window, click Configure Settings. Click Scan. Click the Picture Tab. User’s Guide Scan...
Page 112
Location: Edit field and Browse button for choosing a folder. Save into new folder with current date as file name: Select to save scanned files to the base name and location you specified. Click OK or Apply. Kodak EasyShare 5300 AiO...
Maintenance Maintenance The Kodak EasyShare All-in-One requires little maintenance. However, you should clean the glass and lid backing to remove dust and fingerprints. Fingerprints and other debris on the glass or lid backing could slow down performance and affect the accuracy of scanning.
Dry the glass with a lint fee cloth. Clean the Scanner Lid Minor debris can accumulate on the document backing located underneath the scanner lid of the Kodak EasyShare AiO. Turn off the EasyShare AiO and raise the lid.
Click Firmware Upgrade. Ink Cartridges Your Kodak EasyShare AiO uses separate black and color ink cartridges. The ink levels are displayed on the Control Panel and the printer software. When replacing, use genuine Kodak ink cartridges to ensure best results and avoid printhead damage not covered under warranty.
85° F (30° C). WARNING: Use genuine Kodak ink cartridges to ensure best results and avoid printhead damage not covered under warranty. Third party ink cartridges may not contain the necessary Smart Chip information to notify you before the ink cartridge is empty.
Page 117
Remove the bagged ink cartridge from the box and tear open the bag at the notch and remove the ink cartridge. IMPORTANT: Insert the ink cartridge immediately to prevent any drying of the ink. Remove the orange cap from the cartridge by grasping the top edge and pulling/rotating it off the ink cartridge.
Clean the printhead Calibration The Kodak EasyShare AiO performs a calibration every time you install or replace a printhead. However, you can run a calibration if you are seeing changes in the image quality. Calibration aligns the printheads and performs a nozzle health check to enable high-quality prints.
Page 119
To clean printhead from control panel Press Menu to display the Main Menu. Press until Clean Printhead is selected. Press OK to go to the Clean Printhead menu. Press OK to perform a Basic Clean. Press to select Deep Clean and press OK to perform a Deep Clean. Replace Printhead Make sure the EasyShare AiO is on.
Page 120
Chapter 7 Remove the old printhead. Remove the printhead from its bag. Remove and discard the clear plastic casing and the orange protective cap. Place the printhead into the carriage. Kodak EasyShare 5300 AiO...
Page 121
Maintenance Push against the back wall of the printhead until it clicks into place. Reinstall the ink cartridges. User’s Guide...
You may be required to ship Products, at your expense, to the authorized service facility for the country where the Products were purchased. Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts.
Chapter 8 Kodak along with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under this warranty. If replacement parts are used in making repairs, those parts may be remanufactured. or may contain remanufactured materials.
Amount of memory (MB) and free hard disk space Printer serial number Version of Kodak EasyShare software Version of Kodak Home Center software Print a Diagnostics Page Exact error message you received Your unit's Kodak Service Number (under the printer access door). User’s Guide Support...
Support Action/Solution Check the ink levels. You will need a replacement Ink cartridge soon. Install a new Kodak approved Ink Cartridge for best results. Install a new Kodak approved Ink Cartridge for best results. Upgrade your printer’s firmware for best results.
Page 128
Proofsheet is printed. When the printer scans Action/Solution IMPORTANT: For best result, use only Kodak ink cartridges & paper for your printer. 1 Disengage the photo paper tray if engaged. 2 Turn the AiO off for 5...
Page 129
Message Load plain paper for duplexing. Message Printhead missing or not installed correctly. Printer requires calibration. Calibration unsuccessful Cannot read calibration sheet. Some photos may not be visible. Maximum number of photos exceeded. Ink overflow container is full. Printer error. Print job unsuccessful.
If you are using a switched power outlet, make sure the switch is on. Make sure the power outlet is supplying power. If none of the above corrects the problem, contact Kodak support. Bluetooth Device not Recognized Probable Cause 1 The internal Bluetooth radio in the device may be turned off.
Corrective Action Enter a PIN of 1111 into the sending device. Device not Recognized Any of the following can cause the prevent your Kodak EasyShare AiO from reading a connected digital camera or memory card. The camera is turned OFF.
After checking connections, restart your computer. Make sure your computer meets the minimum system requirements. Upgrade your system if necessary. For more information on connecting your Kodak AiO printer to your computer, see the Setup Poster that came with your unit. No Paper Feed Paper does not feed.
Paper Jam The paper did not advance or was not picked properly from the paper tray. Open the paper trays and remove the paper supply. Press in the latches on the rear access door and remove it. Pull the paper out from the rollers without tearing it. IMPORTANT: If the paper tears while removing it, check inside the AiO for torn pieces of paper and remove them.
Make sure your computer meets the minimum system requirements. Upgrade your system if necessary. NOTE: The Kodak AiO printer is compatible with the Kodak 8-in-1-card reader (sold separately). Other Kodak USB card readers may work with the printer; however, other manufacturers’ card readers are not supported. Wrong Paper Size The paper you selected does not match the active paper tray.
Page 135
Change the picture quality setting (or resolution) on your digital camera to 3:2. See your camera user’s guide for details. Adjust cropped pictures using Kodak EasyShare software on your computer. If you are printing from an application on your computer, select the proper paper size in print options.
Page 136
Adjust the exposure compensation on your camera, and try re-taking the picture. See your camera user’s guide for details. Edit the picture using Kodak EasyShare software on your computer. See the EasyShare software Help for details. Make sure the printer is not placed in direct sunlight or is not operating in a high-temperature environment.
Page 137
Printing Stops Printing stops during mid-print. Paper stops feeding, and Status light may blink. IMPORTANT: For best result, use only Kodak Ink cartridges and paper for your printer. Check the paper Disengage the photo tray if engaged. Check the paper access on the back of the printer.
Connect your EasyShare AiO to your computer with a standard USB cable. Probable Cause 3 The EasyShare AiO Home Center software is not installed. Insert the Kodak EasyShare 5000 All-in-One Printer installation CD and install the software. Kodak EasyShare 5300 AiO...
Page 139
Probable Cause 4 Your computer system resources may be low. Turn off your computer and EasyShare AiO and then turn them back on. If the problem still persists, try scanning at a lower resolution. Scanned Image Blank Your original is not placed correctly on the scanner glass. Place your original face down on the right front corner of the scanner glass.
Available Disk Space Monitor Resolution Color Depth Interface Removable Drive Paper Types The following tables show the paper types and sizes the Kodak EasyShare AiO supports for copying and printing. 20 to 24 lb Plain paper (64 to 90 gsm) Photo paper...
Page 142
3.5x7.25 in. (89x184 mm) Greeting Card 4x5.5 in. (101x140 mm) 4x8 in. (101x203 mm) Hagaki (100x148 mm) Supported Paper Sizes Tray Main Main Main Main Main Photo Photo Main Main Main Main Main Main Main Main Kodak EasyShare 5300 AiO...
AiO and its associated AC adapter will be left unused for long periods of time, unplug the AC adapter from the power outlet and the phone line from the modem. WARNING The use of an accessory attachment that is not recommended by Kodak, such as an AC adapter, could cause fire, electric shock, or injury. WARNING Pushing objects through the equipment openings can result in an electric shock or risk of fire.
WARNING Do not expose this product to liquid, moisture, or extreme temperatures. KODAK AC adapters are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards.
Contact your local Kodak representative or refer to collection and recovery programs available for this product Notice to Users in the European Economic Area The Kodak EasyShare All-in-One is designed to function with analogue telephone networks in the following countries. Austria Belgium...
Page 146
This equipment is designed for DTMF tone dialing and loop disconnect dialing. In the unlikely event of problems with loop disconnect dialing, it is recommended to use this equipment only with the DTMF tone dial setting. Kodak EasyShare 5300 AiO...
JPEG is a compressed image file format. JPEG is a "lossy" format, which means some quality is lost when the image is compressed. KPT: Kodak Perfect Touch PictBridge: A Camera and Imaging Products Association standard that enables direct printing between any PictBridge compliant digital cameras and any PictBridge compliant printer.