Kodak EasyShare 5100 User Manual page 9

Light Status
On/Off light is off.
The On/Off light is a steady
green.
The On/Off light is a flashing
green.
The On/Off light is a flashing
yellow.
The On/Off light is a flashing
red.
User's Guide
On/Off Light
Cause
The printer is turned off.
The printer does not have power
applied.
The printer needs attention.
The printer is properly powered
up, on, and ready.
The printer is busy.
The printer is in the initializing
process.
The printer has detected an error
condition.
The printer has detected an error
condition that needs your
attention.
Product Overview
Action/Solution
Press the On/Off button to turn
the printer on.
Check the power cord light
status.
Check to see if the Photo Tray
light is on. If the Photo Tray light
is on for more that 20 seconds
and the On/Off light does not
come on, disconnect the power
for 5 seconds and reconnect the
power. If the Photo Tray light
does not go out after 20 seconds
and the On/Off light comes on,
contact Kodak for assistance.
None: You may start printing,
copying, scanning, or other
tasks.
None: Normal operation when
performing a print, copy, scan, or
other job request.
None: Please wait and allow the
printer to complete the
initialization process (About 30
seconds). If the flashing green
persists, you may have an issue
with the printer. Visit Kodak.com
for additional troubleshooting
steps or contact your local
Kodak Call Center.
Disconnect power for 5 seconds
and reconnect power. If the
condition persists, please check
the Quantity Display for
additional codes. Contact Kodak
for assistance.
Check the status monitor on your
computer for a message.
Please check for other Lights to
be on and follow the instruction
for that Light.
Check the status monitor on your
computer for a message.
5