Omron H5S Series Manual page 16

Multiple-day Operation 2
Weekly, 2 Circuits
Example: ON at 22:00 from Monday through Friday and OFF at 8:00
each following morning.
SUN MON
22
1. Set the Mode Switch to P1 or P2. *1
(The Time Switch enters program
setting mode.)
→For 4-circuit models, refer to
page 18.
P1
P2
RUN
2. Press the Day Keys to turn ON the
bar ( ) at the positions of Monday
through Friday.
Set the ON time with
3. Press WRITE .
MON
Press to turn OFF the bar
( ) at the Monday position and
press SAT to turn ON the bar (
at the Friday position.
Set the OFF time with
4. Press WRITE
*1 If one or more programs have already been set, the display starts
showing the set programs.
To add another program, press
is displayed.
*2 Holding down the
Pressing decrements the value of the key that was last
pressed.
Downloaded from Elcodis.com electronic components distributor
Yearly, 2 Circuits Yearly, 4 Circuits
TUE WED THU FRI
8 22 8 22 8 22 8 22
Shaded portion
indicates blinking of
the indicator.
TIMER
PULSE
SUN MON TUE WED THU FRI SAT
h and m . *2
SUN MON TUE WED THU FRI SAT
)
SUN MON TUE WED THU FRI SAT
h
and m . *2
to enter the settings.
WRITE repeatedly until "--:--"
h and m Keys rapidly advances the value.
Pulse-output Operation
Weekly, 2 Circuits
Example: ON for 30 seconds at 8:25 am from Monday through
Saturday.
SAT
SUN MON
30 s
8
AM8:25
1. Set the Mode Switch to P1 or P2.*1
Number of
(The Time Switch enters program
remaining steps
setting mode.)
→For 4-circuit models, refer to
page 18.
P1
P2
RUN
2. Press the Day Keys to turn ON the
bars ( ) at the positions of Monday
through Saturday.Set the ON time
h
with and
3. Press WRITE
Set the pulse width with
The displayed pulse width changes
by pressing this key in the following
order.
1s→2s...→59s→1m...→59m→60m→1s
4. Press
WRITE
*1 If one or more programs have already been set, the display starts
showing the set programs.
To add another program, press
is displayed.
*2 Holding down the
Pressing
pressed.
Note:
• If multiple settings are required, repeat steps 2 through 4.
• Both the ON time and pulse width must be set.
• All of the weekly programs for the selected circuit (output) can be
checked by pressing
• When the Mode Switch is set to P1 or P2 (to PRGM for the 4-
circuit model), the Time Switch stops automatic operation. To
forcibly turn ON or OFF the output, use the Output ON/OFF
switches.
• The set data will be cleared if the Output setting switch is moved
between the TIMER and PULSE positions after the data has been
set.
Yearly, 2 Circuits Yearly, 4 Circuits
TUE WED THU FRI
Shaded portion
indicates blinking of
the indicator.
TIMER
PULSE
SUN MON TUE WED THU FRI SAT
m . *2
SUN MON TUE WED THU FRI SAT
.
PLS
. *2
SUN MON TUE WED THU FRI SAT
to enter the settings.
WRITE repeatedly until "--:--"
h and m Keys rapidly advances the value.
decrements the value of the key that was last
WRITE in program setting mode.
H5S
SAT
Number of
remaining steps
16