Display Switching - Omron H5S Series Manual

Switching between 12-hour and 24-
hour display
Weekly, 2 Circuits
h
Each time is pressed for 2 s or more in RUN mode, the current
time switches between 12-hour (AM/PM) and 24-hour display.
SUN MON TUE WED THU FRI SAT

Display Switching

Each time m is pressed for 2 s or more in RUN mode, the displayed
content switches as shown below.
Weekly, 2 Circuits
Current time Total time
Next operation
(Factory setting)
Note: Displays only when Input selection (see function F2 on
page 23) is set to
Yearly, 2 Circuits
Current time
Current month and day
(Factory setting)
Note: Displays only when Input selection (see function F2 on
page 23) is set to
Yearly, 4 Circuits
Current time
Current month and day
(Factory setting)
Downloaded from Elcodis.com electronic components distributor
Yearly, 2 Circuits Yearly, 4 Circuits
SUN MON TUE WED THU FRI SAT
Total count
hour cnt
(See note.)
(See note.)
totl.
Total time Total count
Current time
Next operation
hour
(See note.)
(See note.)
totl.
Current time
Next operation
Override and Automatic Return
Operation
Weekly, 2 Circuits
Helps to cope with sudden schedule changes without having to
revise the existing program. This function allows ON/OFF states that
were forcibly set using the Output ON/OFF Switch to be maintained
until the next ON/OFF time.
Turn output OFF while maintaining AUTO
operation
1. Change the setting of the Output ON/OFF Switch from AUTO to
OFF.
2. Return the Output ON/OFF Switch from OFF to AUTO
while pressing
state.)
3. The regular operation will be performed from the next
ON time.
Turn output ON while maintaining AUTO
operation
1. Change the setting of the Output ON/OFF Switch from AUTO to
ON.
2. Return the Output ON/OFF Switch from ON to AUTO
with WRITE
state.)
3. The regular operation will be performed from the next
OFF time.
cnt
Yearly, 2 Circuits Yearly, 4 Circuits
WRITE . (Output remains in the OFF
pressed. (Output remains in the ON
H5S
O N
AU TO
O F F
O N
AU TO
O F F
22