Omron H5S Series Manual page 14

Time Adjustment (Weekly Models)
Weekly, 2 Circuits
Example: Set the current time to Saturday 17:28.
1. Set the Mode
Switch to RUN.
2. Press
TIME ADJ
The symbol flashes.
3. Press SAT .
(The bar ( ) mark at the Saturday
position will turn ON.)
Set the time with
4. Press WRITE
and the Time Switch will start from 0
second.
* Holding down the
Pressing decrements the value of the key that was last
pressed.
Note:
• When first turned ON or after a reset,
the time adjustment display appears
on the screen. Adjust the time by
following steps 3 and 4.
• If TIME ADJ is pressed again before
pressing WRITE
cancelled. (The setting is not revised.)
Downloaded from Elcodis.com electronic components distributor
P1
Shaded portion indicates
P2
blinking of the indicator.
RUN
for 2 s or more.
SUN MON TUE WED THU FRI SAT
h and m . *
SUN MON TUE WED THU FRI SAT
to enter the setting,
SUN MON TUE WED THU FRI SAT
h
and m Keys rapidly advances the value.
SUN MON TUE WED THU FRI SAT
, the setting is
Time Adjustment (Yearly Models)
Yearly, 2 Circuits Yearly, 4 Circuits
Example: Set the current time to 17:28 on August 15, 2006.
1. Set the Mode
P1
Switch to RUN.
PRGM
P2
RUN
RUN
2 circuits 4 circuits
2. Press TIME ADJ for 2 s or more.
The symbol flashes.
3. Specify the date by pressing
Y
D
and . *
4. Press WRITE .
Set the time with h and m . *
5. Press WRITE to enter the settings,
and the Time Switch will start from 0
second.
* Holding down the h and m Keys rapidly advances the value.
Pressing decrements the value of the key that was last
pressed.
Note:
• When first turned ON or after a reset,
the time adjustment display appears
on the screen. Adjust the time by
following steps 3 through 5.
• If TIME ADJ is pressed again before
pressing , the setting is
WRITE
cancelled. (The setting is not revised.)
H5S
Shaded portion indicates
blinking of the indicator.
,
M
14