Omron H5S Series Manual page 10

Digital time switch
Hide thumbs Also See for H5S Series:
Table of Contents

Advertisement

Dimensions
Note: All units are in millimeters unless otherwise indicated.
Digital Time Switch
Flush Mounting Model
H5S-@A@/-@B@
H5S
TIME SWIT CH
Surface Mounting Model
H5S-@FA@/-@FB@
H5 S
TIME SWI
TCH
Downloaded from
Elcodis.com
electronic components distributor
9.5
6
72
(75 × 75)
72
(12.5)
Protective Cover
Y92A-72C (Order separately)
Note: 1. The terminal screws are M3.5.
2. This illustration shows a 2-circuit model. The 4-circuit model
has the same dimensions.
72
Mounting holes
for four M4 screws
63.2
56
(75 × 75)
96 89 72
Protective Cover
Y92A-72C (Order separately)
(With the large terminal cover (order separately) attached)
66.7
126.7
Four M3 x 8 screws for
mounting the Y92A-72H
Large Terminal Cover
(included with the Y92A-72H)
Y92A-72H Large Terminal Cover
(Order separately)
Use a tool such as long nose pliers to prepare the openings for pulling wires.
Note: 1. The terminal screws are M3.5.
2. This illustration shows a 2-circuit model. The 4-circuit model
has the same dimensions.
(53.2)
Two terminal covers (included)
49
Four M3 x 8 screws (included) for mounting
the terminal covers
67.6 × 67.6
Two M4 x 12 screws (included)
for the mounting bracket
Mounting bracket (included)
(61.5)
(9.5)
58.5
55
49
(20.2)
16
Y92F-90 DIN Track
Mounting Base
(Order separately)
Four M3 x 8 screws (included)
for mounting terminal covers
Two terminal covers (included)
37
17.7
When using the product
in an exposed mounting
condition, always use the
Y92A-72H Large
Terminal Cover (order
separately) to comply
with Electrical Appliance
and Material Safety Law
(for Japan).
Panel Cutout
+
0.8
68
0
9.5
49
Mounting panel
Note: Panel thickness: 1 to 5 mm
(Surface mounted)
Mounting holes
56±
0.15
Mounting panel
*Diameter of pilot holes for
included M4 tapping screws (guideline)
Panel thickness t
0.8 to 1.2
Hole diameter
3.6
(DIN track mounted)
Y92F-90 DIN Track Mounting Base
(Order separately)
DIN Track
Mounting panel
71.1 *1
79.8 *2
Note: 1. Using a PFP-50N or PFP-100N
Mounting Track.
2. Using a PFP-100N2 Mounting Track.
H5S
+
0.8
68
0
4-dia. *
89±
0.2
1.6 to 4
3.7
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents